Electricity/Gas/Water Products and services

Asia wide Manufacturing Business Platform in Malaysia

TECH DIRECTORY Malaysia

Electricity/Gas/Water

Industry

  • Ultrasonic Gas Meter Ultrasonic Gas Meter
    • Catalogue
    • Distributor required

    The ultrasonic gas meter adopts a method based on measuring the difference in propagation time by alternately repeating transmission and reception with a pair of ultrasonic sensors as the time difference of ultrasonic waves varies with flow velocity; this allows for extreme accuracy of measurement and a wide range of flow rate. ○High Accuracy and Wide Range of Flow Rate (±1% RD, Flow Rate Range1: 40) ○Responds Quickly to Flow Rate Change ○No Moving Parts ○Explosion-proof Design ○Self-diagnostic Function ○Communication Function

    Target industry: Electricity/Gas/Water

    Hitachi Automotive Systems Measurement, Ltd.

  • Gas Meter Gas Meter
    • Catalogue
    • Distributor required

    The gas meter is a volumetric flowmeter for gases which directly measures the flow rate by using two sets of rotors. Since the two sets of rotors rotate without making contact, it is hardly subject to accuracy due to equipment deterioration and can measure with high precision and over a wide flow volume range. Furthermore, the counting unit is equipped with an electronic temperature/pressure compensator (ETPC), which calculates the temperature and pressure inside the tubes detected by each sensor and displays totalized flow rate of the gas converted into the reference state. ○High Accuracy and Wide Measurement Range ○Wide Pressure Range and Less Pressure Loss ○Low Sensitivity Flow Rate ○Built-in Automatic Fueling Function

    Target industry: Electricity/Gas/Water

    Hitachi Automotive Systems Measurement, Ltd.

  • Turbine Gas Meter Turbine Gas Meter
    • Catalogue
    • Distributor required

    The turbine gas meter, more compact and light than positive displacement gas meters, is a highly accurate gas meter which was designed for city gas measurements and is capable of measuring large volumes of gas. Furthermore, the counting unit is equipped with an electronic temperature/pressure compensator (ETPC), which calculates the temperature and pressure inside the tubes detected by each sensor and displays totalized flow rate of the gas converted into the reference state. ○High Accuracy and Wide Measurement Range ○Easy Maintenance and Inspections ○Enhanced Urability ○Compact Design

    Target industry: Electricity/Gas/Water

    Hitachi Automotive Systems Measurement, Ltd.

  • Emergency Shutoff Valve Emergency Shutoff Valve
    • Catalogue
    • Distributor required

    The emergency shutoff valve (MBA series), thanks to using a carbon dioxide cartridge that generates a large initial torque on the driving source and employing a ball valve, is perfectly suited as safety and disaster prevention equipment for shutting off various types of pipelines in case of emergencies. ○Operated by Reliable Carbon Dioxide Cartridge ○No Auxiliary Equipment Required ○Either horizontal or vertical piping is available. ○Opening/closing can be performed manually a handle. ○Over 20,000 Units sold in Japan and Overseas

    Target industry: Industrial Electrical/Control Equipment Industrial Machinery/Devices Electricity/Gas/Water

    Hitachi Automotive Systems Measurement, Ltd.

  • High-frequency bolt heaters or synchro pump and jack-up systems for turbine casing. We have Japan’s most innovative large-sized bolt tightening products. High-frequency bolt heaters or synchro pump and jack-up systems for turbine casing. We have Japan’s most innovative large-sized bolt tightening products.
    • Distributor required
    • Partnership required

    [High-frequency bolt heaters] Our innovative bolt heater is now in place for conventional electrothermal or gas heaters. Our induction heating method using a high-frequency current rapidly heats magnetic metals, which dramatically reduces the operation time of, for example, quenching turbine casing bolts. Being automatic without matching process, and no additional cooling water is required as the inverter chiller type cooling water circulation system maintains a consistent temperature. No tools are required, so replacement of the work coil is easy. [Synchro pump and jack-up system] This is not an expensive synchro pump, but rather a system that can control up to four sets of jacks and pumps, in which jacks are lifted up while keeping level the turbine casing, etc. You can remotely control the system with the controller, reducing the workload dramatically. In addition, the effect can be maximized by using the “Long stroke jack", which can jack objects up as far as 350mm without any replacement process.

    Target industry: Energy Electricity/Gas/Water Other

    Torque System Co., Ltd.

  • NK-8900 Non Metallic Type NK-8900 Non Metallic Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is made of resins or special fabrics - non metallic expansion joint. Conpared to metallic one, it is more flexible and it has variety of material.

    Target industry: Construction Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-10000 Square Type NK-10000 Square Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is used for duct plumbing.

    Target industry: Construction Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-8400 Gimbal Type NK-8400 Gimbal Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model can be used to absorb angular displacemet in all direction. Normally, two or more joints are installed to absorb axial movement and lateral movements.

    Target industry: Construction Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-8300 Hinged Type NK-8300 Hinged Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model can be used to absorb angular displacemet in only one direction. Normally, two or more joints are installed to absorb axial movement and lateral movements.

    Target industry: Other Manufacturing Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-8700 Pressure Balanced Type NK-8700 Pressure Balanced Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is designed to absorb axial movement and lateral movement while retaining the pressure force. The basic principle of this is that the pressure force is maintained using a compensation bellow and two line bellows connected by tie rods. The pressure force acting on the line bellow via the tie rods.

    Target industry: Paper Making/Paper Products Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-8600 In-Line Pressure Balanced type NK-8600 In-Line Pressure Balanced type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is designed to absorb axial movement and lateral movement while retaining the pressure force. The basic principle of this is that the pressure force is maintained using a compensation bellow and two line bellows connected by tie rods. The pressure force acting on the line bellow via the tie rods.

    Target industry: Woodworking/Wood Products Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-7400 Universal Bellows Type NK-7400 Universal Bellows Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model has two double bellows separated by middle pipe and can absorb both axial movement and lateral movement at the same time.

    Target industry: Garments/Textiles Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-6800 Double Bellows Type NK-6800 Double Bellows Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model has double bellows connected by middle pipe. Therefore, it can absorb bigger movement than single one.

    Target industry: Food/Beverage Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-7000・7100 Reinforced Bellows Type NK-7000・7100 Reinforced Bellows Type
    • Catalogue
    • Distributor required
    • Partnership required

    NK-7000/single bellows NK-7100/double bellows This model has reinforcing rings between each convolution. Therefore, it is used for high pressure and/or high temperature places.

    Target industry: Nonferrous metals Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-7500・7700 Outer Sleeve Type NK-7500・7700 Outer Sleeve Type
    • Catalogue
    • Distributor required
    • Partnership required

    NK-7500/single bellows NK-7700/double bellows Bellows are covered with outer sleeve to prevent foreign matter from outside and bukling caused by large axial movement.

    Target industry: Construction/Mining Machinery Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-7900 (・NK-7900E) Welding Type  (Both Ends Fixed Type) NK-7900 (・NK-7900E) Welding Type (Both Ends Fixed Type)
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with flange with welding. NK-7900E use more flexible bellows.

    Target industry: Agricultural Machines Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-7300 (・NK-7300E) Non Welding Type  (Both Ends Floating Type) NK-7300 (・NK-7300E) Non Welding Type (Both Ends Floating Type)
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with flange without welding (flare assembling). NK-7300E use more flexible bellows.

    Target industry: Resin/Plastic/Rubber Products Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-6500・6600・6700 General Purpose Type NK-6500・6600・6700 General Purpose Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with pipe (and flange) at both ends. NK-6500/flange type with shipping bolt NK-6600/flange type without shippingg bolt NK-6700/pipe end type

    Target industry: Metallic Products/Parts Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-JB-F Non Metallic Type NK-JB-F Non Metallic Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is made of resins or special fabrics - non metallic flexible hose. Conpared to metallic one, it is more flexible and it has variety of material.

    Target industry: Iron and steel industry/Metal material Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-RB-D PTFE Lining Rubber Joint NK-RB-D PTFE Lining Rubber Joint
    • Catalogue
    • Distributor required
    • Partnership required

    This models is rubber joint with PTFE lining.

    Target industry: Medical Supplies/Biotechnology Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-RB-F Rubber Flexible Joint NK-RB-F Rubber Flexible Joint
    • Catalogue
    • Distributor required
    • Partnership required

    This models is rubber joint for absorbing vibration, axial movement and noise.

    Target industry: Chemical Materials/Products Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-1400 Pipe End Type NK-1400 Pipe End Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with pipes at both ends. It is used for butt welding and connecting with other fittings.

    Target industry: Other Manufacturing Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-6000 Jacket Type NK-6000 Jacket Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model has duble hoses, inner hose and outer hose. Temperature of inner hose is adjusted by fluid in outer hose. Therefore, the viscosity of fluid in inner hose can be managed.

    Target industry: Construction Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-FJ-S PTFE Hose - Sanitary Flange Type NK-FJ-S PTFE Hose - Sanitary Flange Type
    • Catalogue
    • Distributor required
    • Partnership required

    NK-FJS-S/Straight tube NK-FJP-S/Spiral tube [PTFE] Heat Resistance ・wide range of temperature (-100 to + 260deg C. ) Chemical Resistance ・used for most of chamicals and solvents. Non Adhesiveness ・used for cohesive fluid and easy for cleaning Durability ・no aging and degradation Electrical Properties ・low permittivity and power factory without regard to temperature and frequency

    Target industry: Chemical Materials/Products Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-FJ-C PTFE Hose - Female Union Type NK-FJ-C PTFE Hose - Female Union Type
    • Catalogue
    • Distributor required
    • Partnership required

    NK-FJS-C/Straight tube NK-FJP-C/Spiral tube [PTFE] Heat Resistance ・wide range of temperature (-100 to + 260deg C. ) Chemical Resistance ・used for most of chamicals and solvents. Non Adhesiveness ・used for cohesive fluid and easy for cleaning Durability ・no aging and degradation Electrical Properties ・low permittivity and power factory without regard to temperature and frequency

    Target industry: Medical Supplies/Biotechnology Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-FJ-B PTFE Hose - Male Threaded Type NK-FJ-B PTFE Hose - Male Threaded Type
    • Catalogue
    • Distributor required
    • Partnership required

    NK-FJS-B/Straight tube NK-FJP-B/Spiral tube [PTFE] Heat Resistance ・wide range of temperature (-100 to + 260deg C. ) Chemical Resistance ・used for most of chamicals and solvents. Non Adhesiveness ・used for cohesive fluid and easy for cleaning Durability ・no aging and degradation Electrical Properties ・low permittivity and power factory without regard to temperature and frequency

    Target industry: Medical Supplies/Biotechnology Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-FJ-F PTFE Hose - Flange Type NK-FJ-F PTFE Hose - Flange Type
    • Catalogue
    • Distributor required
    • Partnership required

    NK-FJS-F/Straight tube NK-FJP-F/Spiral tube NK-FJIS-F/Inserted tube [PTFE] Heat Resistance ・wide range of temperature (-100 to + 260deg C. ) Chemical Resistance ・used for most of chamicals and solvents. Non Adhesiveness ・used for cohesive fluid and easy for cleaning Durability ・no aging and degradation Electrical Properties ・low permittivity and power factory without regard to temperature and frequency

    Target industry: Chemical Materials/Products Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-2300KF Vacuum - KF Flange Type NK-2300KF Vacuum - KF Flange Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with KF(NW) flange at both ends. It is easy for installing because of clamp connection.

    Target industry: Precision Equipment Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-2300PT Vacuum - Pipe End Type NK-2300PT Vacuum - Pipe End Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is compact, durable, pressure resisting, long life, and safe. It is used in various fields - high precision machine (semiconductor and liquid crystal panes), medical and pharmacy machine, biotechnology machine, and food and beverage machine.

    Target industry: Semiconductors/LCD/FPD Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-3500 Lever Coupling Type NK-3500 Lever Coupling Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with lever coupling at both ends. It is useful for conveying from strage tank to transfar tank.

    Target industry: Woodworking/Wood Products Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-1800 Sanitary Flange Type NK-1800 Sanitary Flange Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with sanitary flanges at both ends. [Point]STD type ・Welding with tube and sanitary flange [Point]SNT type ・No gap between tube and sanitary flange ・Higher performance than STD type

    Target industry: Garments/Textiles Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-PG3 For Continuous Use Diesel Engine Fuel NK-PG3 For Continuous Use Diesel Engine Fuel
    • Catalogue
    • Distributor required
    • Partnership required

    NK-PG series solve the problem of the broken cused by metal fatigue. Pulsation are absorbed by "elastcity of PTFE" and "rigidity of Stainess Steel". This products are used in the plumbing of engine and pump.

    Target industry: Food/Beverage Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-PG2 For Emergency Diesel Engine Fuel NK-PG2 For Emergency Diesel Engine Fuel
    • Catalogue
    • Distributor required
    • Partnership required

    NK-PG series solve the problem of the broken cused by metal fatigue. Pulsation are absorbed by "elastcity of PTFE" and "rigidity of Stainess Steel". This products are used in the plumbing of engine and pump.

    Target industry: Nonferrous metals Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-7800 Pump Joint (Super 10・Super 20) NK-7800 Pump Joint (Super 10・Super 20)
    • Catalogue
    • Distributor required
    • Partnership required

    ・Conpared with rubber joint, metallic joint is used for various fluid and temperature. Moreover, it does not have degradation over time and smell transfaring to the fluid. ・This model is non welding assembly type and the material of inner bellows is SUS316L, so it is very good against corrosion.

    Target industry: Resin/Plastic/Rubber Products Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-6300 Non Welding Type ( - MLIT specification compliant) NK-6300 Non Welding Type ( - MLIT specification compliant)
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with flange with no welding. [Point]NK-6300 ・Both sides loose flange ・Suitable for absorbing vibration and quake-proof. ・Material of fluid-contact part is stainless steel.

    Target industry: Metallic Products/Parts Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-4000・4100 Ribbon Braid Type NK-4000・4100 Ribbon Braid Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with flange and stub end (or pipe). Tape (Plate) braiding type = Conpared with wire braiding, it has higher strength against internal pressure but lower flexibility. [Point]NK-4000 ・One side fixed flange (w/ pipe) and the other side loose flange (w/stub end) [Point]NK-4100 ・Both sides loose flange (w/ stub end) ・Material of fluid-contact part is stainless steel.

    Target industry: Iron and steel industry/Metal material Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-3100 Flange(Standard Use) Type NK-3100 Flange(Standard Use) Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with flange and collar. [Point]NK-3100 ・Both sides loose flange ・Material of fluid-contact part is stainless steel.

    Target industry: Medical Supplies/Biotechnology Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-2500・2600 Flange(Wide Use) Type NK-2500・2600 Flange(Wide Use) Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with flange and stub end (or pipe). [Point]NK-2500 ・One side fixed flange (w/ pipe) and the other side loose flange (w/stub end) ・We can choose tube from 3 different types. [Point]NK-2600 ・Both sides loose flange (w/ stub end) ・Material of fluid-contact part is stainless steel. ・We can choose tube from 3 different types.

    Target industry: Chemical Materials/Products Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-3400 Light Union Type NK-3400 Light Union Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with loose screw fitting at both ends. [Point] ・Metal sealing fitting * no gasket needed ・No welding type is strong against corrosion beucase of no stress of heat affect by welding. ・Any conbinations of male and female screw are available.

    Target industry: Optical Equipment/Parts Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-1900 Female Union x Male Threaded Type NK-1900 Female Union x Male Threaded Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with one side swivel female x the other side fixed male fititngs. [Point] ・Easy for installing because of one side loose fitting. ・Any types of standards and special specifications are available. ・We can choose tube from 3 different types.

    Target industry: Precision Equipment Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-1500 Male Threaded Type NK-1500 Male Threaded Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with fixed male fitting at both ends. [Point] ・Any types of standards and special specifications are available. ・We can choose tube from 3 different types.

    Target industry: Industrial Electrical/Control Equipment Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-1300 Female Threaded Type NK-1300 Female Threaded Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with fixed female fitting at both ends. [Point] ・Any types of standards and special specifications are available. ・We can choose tube from 3 different types.

    Target industry: Automotive/Transport Machinery Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • NK-1100 Non Welding Union Type (Female Both End) NK-1100 Non Welding Union Type (Female Both End)
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with female union fitting at both ends. [Point] ・Easy for installing because of loose fittings. ・This model is strong against corrosion beucase of no stress of heat affect by welding. ・Special soft tube which is more flexible than standard tube are used. ・Inner Diameter of tube is bigger than standard tube, so you can keep flow rate with smaller pressure loss.

    Target industry: Industrial Machinery/Devices Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • SB3004 SB3004
    • Catalogue

    - SB3004 with Boa® closure system realizes precise fit that you have never felt with rubber boots. It is easily detachable, has stylish design and is applied steel toe cap to protect your toe from falling objects. - It is maintained easily just to wipe after use. - High class product made in Japan.

    Target industry: Construction Forestry Electricity/Gas/Water

    SHIBATA INDUSTRIAL CO.,LTD.

  • Flood Protection Door Flood Protection Door
    • Catalogue

    This product is to provide a flood damage prevention for buildings or premises when a flood disaster occurs. 【Sheet Type】Rubber sheet integrated with installed frame(box) and prevents water infiltration by pulling up the sheet. 【Panel Type】Aluminum panel to be inserted on installed frame to prevent water infiltration. 【Sheet Panel Type】Aluminum panel to be inserted on installed steel frame to prevent water infiltration. 【Panel Slid Type】Stored panel to be pulled out on a rail and closed an opening to prevent water infiltration. 【Panel Swing Type】A panel to be rotated over the opening to prevent water infiltration. 【Shutter Type】A panel installed in the ground to be pulled out and closed the opening to prevent water infiltration.

    Target industry: Construction Electricity/Gas/Water Real Estate

    SHIBATA INDUSTRIAL CO.,LTD.

Industry

PAGE TOP