Industrial Electrical/Control Equipment Products and services

Asia wide Manufacturing Business Platform in Malaysia

TECH DIRECTORY Malaysia

Industrial Electrical/Control Equipment

Industry

  • Lubricant, RV GREASE LB00、RV OIL SB150 Lubricant, RV GREASE LB00、RV OIL SB150
    • Catalogue

    - RV GREASE LB00 RV GREASE LB00 has high-lubricating performance over a wide operating condition range including temperature, speed and load. This has been achieved by applying special additives and high-grade base oil. Compared to the existing grease, RV GREASE LB00 has excellent low temperature performance, reducing input torque. - RV OIL SB150 Although the two requirements are usually conflicting, RV OIL SB150 has achieved well-balanced high lubrication properties and oil exchangeability by utilizing optimized additives together with high grade base oil. You can rest assured it can be used with any precision reduction gear RV without any disadvantages.

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision & High rigidity, Servo Actuator AF series High Precision & High rigidity, Servo Actuator AF series
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features: - Servomotor from Panasonic Corporation (attached) - Pre-lubricated - Solid shaft & hollow shaft - High accurary (backlash 1arc.min.) - Compact body Lineup: - Rated torque 82 N.m ~ 3,856 N.m - Momentary max. torque 289 N.m ~ 11,567 N.m - Allowable load inertia moment 11 kgm^2 ~ 2,713 kgm^2

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision & High rigidity, Gearhead NT series High Precision & High rigidity, Gearhead NT series
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features: - Facial runout 8m - High output speed (up to 70 rpm) - Slim - Hollow shaft - Pre-lubricated - High shock load resistance (withstands 5 x rated torque) - Good accel. performance (up to 2.5 x rated torque) Lineup: - Rated torque 1,470 N.m ~ 2,156 N.m - Allowable starting/stopping torque 2,940 N.m ~ 4,312 N.m - Reduction ratio 1/60

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision & High rigidity, Gearhead RA series High Precision & High rigidity, Gearhead RA series
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features: - Case rotation type & shaft rotation type - Pre-lubricated - Solid shaft - High accuracy (backlash < 1arc.min.) - High shock load resistance (withstands 5 x rated torque) - Good accel. performance (up to 2.5 x rated torque) Lineup: - Rated torque 167 N.m ~ 1,568 N.m - Allowable starting/stopping torque 412 N.m ~ 3,920 N.m - Reduction ratio 1/80 ~ 1/171

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision & High rigidity, Gearhead GH series High Precision & High rigidity, Gearhead GH series
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features: - High output speed (up to 270rpm) - Solid shaft - Flange output type & shaft output type - Pre-lubricated - High shock load resistance (withstands 7 x rated torque) - Good accel. performance (up to 3 x rated torque) Lineup: - Rated torque 69 N.m ~ 980 N.m - Allowable starting/stopping torque 206 N.m ~ 2,942 N.m - Reduction ratio 1/11 ~ 1/31.4

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision & High rigidity, Gearhead RH-CA High Precision & High rigidity, Gearhead RH-CA
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features: - Slim - Base flange (attached) - Large center hole dia. (Ø120mm) - Pre-lubricated - High accuracy (backlash 1arc.min.) - High shock load resistance (withstands 5 x rated torque) - Good accel. performance (up to 2.5 x rated torque) - Easy to install (bolt tightening & location pins only) - Smaller footprint (slim body) Lineup: - Rated torque 3,136 N.m - Allowable starting/stopping torque 7,840 N.m - Reduction ratio 1/152

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision & High rigidity, Gearhead RS series High Precision & High rigidity, Gearhead RS series
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features: - Capacity for 2.5–9t - Hollow shaft (for placement of cables) - Low profile - Pre-lubricated - Right angle input - Table type - High accuracy (backlash 1arc.min.) - High shock load resistance (withstands 5 x rated torque) - Good accel. performance (up to 2.5 x rated torque) - Easy to install (bolt tightening & locating pins only) Lineup: - Rated torque 2,548 N.m ~ 8,820 N.m - Allowable starting/stopping torque 6,370 N.m ~ 17,640 N.m - Reduction ratio 1/120 ~ 1/240

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision & High rigidity, Gearhead RD2 series High Precision & High rigidity, Gearhead RD2 series
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features: - 3 input options : straight (RDS), right angle (RDR), pulley (RDP) - Solid shaft & hollow shaft - Pre-lubricated - High accuracy (backlash 1arc.min.) - High shock load resistance (withstands 5 x rated torque) - Good accel. performance (up to 2.5 x rated torque) - Usable in a wide range of applications - Total 131 models Lineup: - Rated torque 58 N.m ~ 3,136 N.m - Allowable staring/stopping torque 117 N.m ~ 7,840 N.m - Reduction ratio 1/31 ~ 1/253

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision & High rigidity, Reduction gear RV Original series High Precision & High rigidity, Reduction gear RV Original series
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features : - No support bearing - High accuracy (backlash 1arc.min.) - High shock load resistance (withstands 5 x rated torque) - Good accel. performance (up to 2.5 x rated torque) Lineup : - Rated torque 137 N.m ~ 8,820 N.m - Allowable starting/stopping torque 274 N.m ~ 22,050 N.m - Reduction ratio 1/57 ~ 1/192.42

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision, High Speed & High rigidity, Reduction gear RF-P series High Precision, High Speed & High rigidity, Reduction gear RF-P series
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features: - High output speed (up to 250rpm) - High accuracy (backlash 2arc.min.) - Good accel. performance (up to 3 x rated torque) - Adapted for use with food-grade oil - Long service life (20,000h) Lineup : - Rated torque 100 N.m ~ 320 N.m - Allowable starting/stopping torque 300 N.m ~ 960 N.m - Reduction ratio Please ask.

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision & High rigidity, Reduction gear RV-C/CA series High Precision & High rigidity, Reduction gear RV-C/CA series
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features : - Hollow shaft - High accuracy (backlash 1arc.min.) - High shock load resistance (withstands 5 x rated torque) - Good accel. performance (up to 2.5 x rated torque) Lineup : - Rated torque 98 N.m ~ 11,760 N.m - Allowable starting/stopping torque 245 N.m ~ 29,400 N.m - Reduction ratio 1/27 ~ 1/37.34 ※Please ask available reduction ratio with input gears (Option).

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • High Precision & High rigidity, Reduction gear RV-E series High Precision & High rigidity, Reduction gear RV-E series
    • Catalogue

    Nabtesco's precision reduction gear is a reduction gear for precise motion control which uses a planocentric reduction gear mechanism. This reduction gear design has advantages in rigidity and resistace against overload with a compact body due to a large number of simultaneously engaged gear teeth. Furthermore, minimal backlash, rotational vibration and low inerita lead to rapid acceleration, smooth motion and accurate positioning. Features : Compact & slim Lightweight High accuracy (backlash 1arc.min.) High shock load resistance (withstands 5 x rated torque) Good accel. performance (up to 2.5 x rated torque) Lineup : - Rated torque 58 N.m ~ 14,700 N.m - Allowable starting/stopping torque 117 N.m ~ 36,750 N.m - Reduction ratio 1/31 ~ 1/203.52

    Target industry: Industrial Machinery/Devices Precision Equipment Industrial Electrical/Control Equipment

    Nabtesco Corporation

  • VCC-5CL4M (B/W) / VCC-5CL4R (Color) VCC-5CL4M (B/W) / VCC-5CL4R (Color)
    • Catalogue

    5M resolution, Max. 114fps high speed, 55x55x25 small footprint Camera Link camera. Packed with versatile functions perfectly suitable for semiconductor inspection, panel inspection, parts inspection, medical inspection, measurement, appearance inspection, etc. For those who may prefer the faster type of camera, CIS offers VCC-5CL4MHS (monochrome, high speed) and VCC-5CL4RHS (color, high speed), too. For further information for high speed model, please visit our website or contact our sales division.

    Target industry: Industrial Electrical/Control Equipment Measurement/Analytical Instruments Optical Equipment/Parts

    CIS Corporation

  • Step voltage regulater [SVR] Step voltage regulater [SVR]
    • Catalogue

    SVR is suitable to the customer that has a trouble with the unstable receiving voltage at the factory abroad, and it can compensate 20% voltage fluctuation. *For details, please contact us or download the catalog.

    Target industry: Industrial Electrical/Control Equipment Other Manufacturing

    AICHI ELECTRIC CO.,LTD.

  • AICHI ELECTRIC CO., LTD [Solar Power System] AICHI ELECTRIC CO., LTD [Solar Power System]
    • Catalogue

    The result of know-how based on accumlated technologies and numerous construction achivement, we provide the total engineering from the planning to the maintenance by equipment proposal of the solar power generation system. *For details, please contact us or download the catalog.

    Target industry: Industrial Electrical/Control Equipment Energy

    AICHI ELECTRIC CO.,LTD.

  • [Dustproof and dual seal waterproof] Large Bushing Toggle Switch (IP67) [Dustproof and dual seal waterproof] Large Bushing Toggle Switch (IP67)
    • Catalogue

    Stylish design with great waterproofing, compliant with IP67. No accumulation of foreign objects in the movable part of the panel surface, allowing no interference on lever operation. [Features] · Highly reliable dual seal waterproof structure (compliant with IP67) · Stylish design, yet features great waterproofing · Integrated unit allows traditional operability of metal lever · Panel-sealed structure, compliant with IP67 in IEC60529 · Dust-proof design to prevent accumulation of foreign objects in the movable part of the panel surface · Integrated design with the body enables easy installation into panels * For details, please download our catalog or contact us.

    Target industry: Industrial Machinery/Devices Industrial Electrical/Control Equipment Aerospace Related

    NKK SWITCHES HONG KONG CO., LTD.

  • Light-operation rotary switch “NR01 series” Light-operation rotary switch “NR01 series”
    • Catalogue

    “Subminiature rotary switch for reliable operation” Light and reliable switching with crisp operation ■Looking for subminiature rotary switches?  → Small, simple and reliable switch ■Want to have better usability than DIP rotary switches?  → With an integrated steel ball, light and reliable switching is ensured ■No need for complicated functionality  → Medium-ranged switch with simple function of 3 to 5 contact points in a single circuit Ideal for electronic equipment miniaturization and higher-density mounting * For details, please download our catalog or contact us.

    Target industry: Industrial Electrical/Control Equipment Measurement/Analytical Instruments Medical Instruments

    NKK SWITCHES HONG KONG CO., LTD.

  • fume hood Manufacturer-TEXONICS-9845003998 fume hood Manufacturer-TEXONICS-9845003998
    • Distributor required

    TEXONICS-9845003998-Ultrasonic Cleaning Machines,Ultrasonic Cleaning Equipments,Ultrasonic Cleaning System,ultrasonic cleaner,ultrasonic tank cleaner,spray cleaning machine,hot air oven, hot air dryer,waterbath,oilbath,mufflefurnace,wax melting tank,organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Ultrasonic Cleaning Machines, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Manufacturer Ultrasonic Tank, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Bengaluru, Karnataka. Ultrasonic Cleaning Machines, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturers Bangalore Karnataka india , Ultrasonic Cleaning Systems, Ultrasonic Cleaning Equipments, Ultrasonic Cleaning Machines, Ultrasonic Cleaning Machines Bangalore http://texonics.in/index.html http://texonics.in/about.htmlhttp://texonics.in/Water%20Bath.html http://texonics.in/products.html http://texonics.in/Ultrasonic%20Cleaning%20Machines.html http://texonics.in/services.html] http://texonics.in/clients.html http://texonics.in/gallery.html http://texonics.in/contact.html http://texonics.in/Ultrasonic%20Cleaning%20Machines.html http://texonics.in/Oil%20Baths.html http://texonics.in/Ovens.html http://texonics.in/Liquid%20Filling%20Mechines.html http://texonics.in/Wax%20Melting%20Tanks.html Ultrasonic Tank, Ultrasonic Cleaning Machine, Laboratory Cleaning Machines, Low Noise Ultrasonic Machines, Ultrasonic Cleaner, Ultrasonic Cleaner BathEXONICS-9845003998-Ultrasonic Cleaning Machines,Ultrasonic Cleaning Equipments,Ultrasonic Cleaning System,ultrasoniccleaner,ultrasonic tank cleaner,spray cleaning machine,hot air oven, hot air dryer,waterbath,oilbath,mufflefurnace,wax melting tank,organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Ultrasonic Cleaning Equipments,Ultrasonic Cleaning Machines, Ultrasonic Cleaning System, ultrasonic cleaner,ultrasonic tank cleaner, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturers Bangalore Karnataka india

    Target industry: Industrial Electrical/Control Equipment Industrial Machinery/Devices Medical Supplies/Biotechnology

    Texonics

  • wax melting tank,organic waste converter-TEXONICS-9845003998 wax melting tank,organic waste converter-TEXONICS-9845003998
    • Distributor required

    TEXONICS-9845003998-Ultrasonic Cleaning Machines,Ultrasonic Cleaning Equipments,Ultrasonic Cleaning System,ultrasonic cleaner,ultrasonic tank cleaner,spray cleaning machine,hot air oven, hot air dryer,waterbath,oilbath,mufflefurnace,wax melting tank,organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Ultrasonic Cleaning Machines, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Manufacturer Ultrasonic Tank, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Bengaluru, Karnataka. Ultrasonic Cleaning Machines, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturers Bangalore Karnataka india , Ultrasonic Cleaning Systems, Ultrasonic Cleaning Equipments, Ultrasonic Cleaning Machines, Ultrasonic Cleaning Machines Bangalore http://texonics.in/index.html http://texonics.in/about.htmlhttp://texonics.in/Water%20Bath.html http://texonics.in/products.html http://texonics.in/Ultrasonic%20Cleaning%20Machines.html http://texonics.in/services.html] http://texonics.in/clients.html http://texonics.in/gallery.html http://texonics.in/contact.html http://texonics.in/Ultrasonic%20Cleaning%20Machines.html http://texonics.in/Oil%20Baths.html http://texonics.in/Ovens.html http://texonics.in/Liquid%20Filling%20Mechines.html http://texonics.in/Wax%20Melting%20Tanks.html Ultrasonic Tank, Ultrasonic Cleaning Machine, Laboratory Cleaning Machines, Low Noise Ultrasonic Machines, Ultrasonic Cleaner, Ultrasonic Cleaner BathEXONICS-9845003998-Ultrasonic Cleaning Machines,Ultrasonic Cleaning Equipments,Ultrasonic Cleaning System,ultrasoniccleaner,ultrasonic tank cleaner,spray cleaning machine,hot air oven, hot air dryer,waterbath,oilbath,mufflefurnace,wax melting tank,organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Ultrasonic Cleaning Equipments,Ultrasonic Cleaning Machines, Ultrasonic Cleaning System, ultrasonic cleaner,ultrasonic tank cleaner, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturers Bangalore Karnataka india

    Target industry: Industrial Electrical/Control Equipment Industrial Machinery/Devices Medical Supplies/Biotechnology

    Texonics

  • waterbath,oilbath,mufflefurnace-TEXONICS-9845003998 waterbath,oilbath,mufflefurnace-TEXONICS-9845003998
    • Distributor required

    TEXONICS-9845003998-Ultrasonic Cleaning Machines,Ultrasonic Cleaning Equipments,Ultrasonic Cleaning System,ultrasonic cleaner,ultrasonic tank cleaner,spray cleaning machine,hot air oven, hot air dryer,waterbath,oilbath,mufflefurnace,wax melting tank,organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Ultrasonic Cleaning Machines, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Manufacturer Ultrasonic Tank, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Bengaluru, Karnataka. Ultrasonic Cleaning Machines, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturers Bangalore Karnataka india , Ultrasonic Cleaning Systems, Ultrasonic Cleaning Equipments, Ultrasonic Cleaning Machines, Ultrasonic Cleaning Machines Bangalore http://texonics.in/index.html http://texonics.in/about.htmlhttp://texonics.in/Water%20Bath.html http://texonics.in/products.html http://texonics.in/Ultrasonic%20Cleaning%20Machines.html http://texonics.in/services.html] http://texonics.in/clients.html http://texonics.in/gallery.html http://texonics.in/contact.html http://texonics.in/Ultrasonic%20Cleaning%20Machines.html http://texonics.in/Oil%20Baths.html http://texonics.in/Ovens.html http://texonics.in/Liquid%20Filling%20Mechines.html http://texonics.in/Wax%20Melting%20Tanks.html Ultrasonic Tank, Ultrasonic Cleaning Machine, Laboratory Cleaning Machines, Low Noise Ultrasonic Machines, Ultrasonic Cleaner, Ultrasonic Cleaner BathEXONICS-9845003998-Ultrasonic Cleaning Machines,Ultrasonic Cleaning Equipments,Ultrasonic Cleaning System,ultrasoniccleaner,ultrasonic tank cleaner,spray cleaning machine,hot air oven, hot air dryer,waterbath,oilbath,mufflefurnace,wax melting tank,organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Ultrasonic Cleaning Equipments,Ultrasonic Cleaning Machines, Ultrasonic Cleaning System, ultrasonic cleaner,ultrasonic tank cleaner, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturers Bangalore Karnataka india

    Target industry: Industrial Electrical/Control Equipment Medical Supplies/Biotechnology Industrial Machinery/Devices

    Texonics

  • ultrasonic tank cleaner-TEXONICS-9845003998 ultrasonic tank cleaner-TEXONICS-9845003998
    • Distributor required

    TEXONICS-9845003998-Ultrasonic Cleaning Machines,Ultrasonic Cleaning Equipments,Ultrasonic Cleaning System,ultrasonic cleaner,ultrasonic tank cleaner,spray cleaning machine,hot air oven, hot air dryer,waterbath,oilbath,mufflefurnace,wax melting tank,organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Ultrasonic Cleaning Machines, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Manufacturer Ultrasonic Tank, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Bengaluru, Karnataka. Ultrasonic Cleaning Machines, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturers Bangalore Karnataka india , Ultrasonic Cleaning Systems, Ultrasonic Cleaning Equipments, Ultrasonic Cleaning Machines, Ultrasonic Cleaning Machines Bangalore http://texonics.in/index.html http://texonics.in/about.htmlhttp://texonics.in/Water%20Bath.html http://texonics.in/products.html http://texonics.in/Ultrasonic%20Cleaning%20Machines.html http://texonics.in/services.html] http://texonics.in/clients.html http://texonics.in/gallery.html http://texonics.in/contact.html http://texonics.in/Ultrasonic%20Cleaning%20Machines.html http://texonics.in/Oil%20Baths.html http://texonics.in/Ovens.html http://texonics.in/Liquid%20Filling%20Mechines.html http://texonics.in/Wax%20Melting%20Tanks.html Ultrasonic Tank, Ultrasonic Cleaning Machine, Laboratory Cleaning Machines, Low Noise Ultrasonic Machines, Ultrasonic Cleaner, Ultrasonic Cleaner BathEXONICS-9845003998-Ultrasonic Cleaning Machines,Ultrasonic Cleaning Equipments,Ultrasonic Cleaning System,ultrasoniccleaner,ultrasonic tank cleaner,spray cleaning machine,hot air oven, hot air dryer,waterbath,oilbath,mufflefurnace,wax melting tank,organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Ultrasonic Cleaning Equipments,Ultrasonic Cleaning Machines, Ultrasonic Cleaning System, ultrasonic cleaner,ultrasonic tank cleaner, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturers Bangalore Karnataka india

    Target industry: Electrical/Electronic Parts Industrial Electrical/Control Equipment Medical Supplies/Biotechnology

    Texonics

  • Ultrasonic Cleaning System-TEXONICS-9845003998 Ultrasonic Cleaning System-TEXONICS-9845003998
    • Distributor required

    TEXONICS-9845003998-Ultrasonic Cleaning Machines,Ultrasonic Cleaning Equipments,Ultrasonic Cleaning System,ultrasonic cleaner,ultrasonic tank cleaner,spray cleaning machine,hot air oven, hot air dryer,waterbath,oilbath,mufflefurnace,wax melting tank,organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Ultrasonic Cleaning Machines, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Manufacturer Ultrasonic Tank, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Bengaluru, Karnataka. Ultrasonic Cleaning Machines, Ultrasonic Cleaning Equipments, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturers Bangalore Karnataka india , Ultrasonic Cleaning Systems, Ultrasonic Cleaning Equipments, Ultrasonic Cleaning Machines, Ultrasonic Cleaning Machines Bangalore http://texonics.in/index.html http://texonics.in/about.htmlhttp://texonics.in/Water%20Bath.html http://texonics.in/products.html http://texonics.in/Ultrasonic%20Cleaning%20Machines.html http://texonics.in/services.html] http://texonics.in/clients.html http://texonics.in/gallery.html http://texonics.in/contact.html http://texonics.in/Ultrasonic%20Cleaning%20Machines.html http://texonics.in/Oil%20Baths.html http://texonics.in/Ovens.html http://texonics.in/Liquid%20Filling%20Mechines.html http://texonics.in/Wax%20Melting%20Tanks.html Ultrasonic Tank, Ultrasonic Cleaning Machine, Laboratory Cleaning Machines, Low Noise Ultrasonic Machines, Ultrasonic Cleaner, Ultrasonic Cleaner BathEXONICS-9845003998-Ultrasonic Cleaning Machines,Ultrasonic Cleaning Equipments,Ultrasonic Cleaning System,ultrasoniccleaner,ultrasonic tank cleaner,spray cleaning machine,hot air oven, hot air dryer,waterbath,oilbath,mufflefurnace,wax melting tank,organic waste converter,fume hood Manufacturer from Bangalore karnataka,india. Ultrasonic Cleaning Equipments,Ultrasonic Cleaning Machines, Ultrasonic Cleaning System, ultrasonic cleaner,ultrasonic tank cleaner, spray cleaning machine, hot air oven, hot air dryer,waterbath,oil bath, muffle furnace, wax melting tank, organic waste converter,fume hood Manufacturers Bangalore Karnataka india

    Target industry: Electrical/Electronic Parts Industrial Electrical/Control Equipment Medical Supplies/Biotechnology

    Texonics

  • VCC-25CXP1M VCC-25CXP1R VCC-25CXP1M VCC-25CXP1R
    • Catalogue

    25M high resolution, high speed, 65x65x65mm small footprint CoaXPress camera. Packed with versatile functions such as ROI, sequence control, shading compensation, external trigger et.al. 【Features】 ◆25M pixels・Global shutter・CMOS sensor ◆65mm cubic size small footprint ◆CoaXPress I/F ◆Video output DIN terminal ◆Max. 81.83fps  Max. 40m of image transfer is possible at 25Gbps with CXP6x4 lanes ◆Versatile Functions Ex.) White balance/Shading correction/Sequence control/Defect pixel correction by user/External trigger/Vertical and horizontal flip/ROI/Subsampling/GenICam applicable/Black offset/Test pattern output etc...

    Target industry: Measurement/Analytical Instruments Optical Equipment/Parts Industrial Electrical/Control Equipment

    CIS Corporation

  • VCC-120CXP1M VCC-120CXP1R VCC-120CXP1M VCC-120CXP1R
    • Catalogue
    • Distributor required
    • Partnership required

    120M Ultra high resolution, 65x65x68mm small footprint CoaXPress camera. ◆ CANON 120MXSM (13280×9184) sensor ◆ 120M ultra high resolution ◆ 9.4fps Frame rate

    Target industry: Industrial Machinery/Devices Industrial Electrical/Control Equipment Measurement/Analytical Instruments

    CIS Corporation

  • GANKO mounting systems for display GANKO mounting systems for display
    • Catalogue
    • Distributor required
    • Partnership required

    Allow user to install displays firmly and adjust angles freely

    Target industry: Medical Instruments Industrial Machinery/Devices Industrial Electrical/Control Equipment

    Nabeya Bi-tech Kaisha (NBK)

  • Low profile and small head screws Low profile and small head screws
    • Catalogue
    • Distributor required
    • Partnership required

    Low profile and smaller head screws

    Target industry: Industrial Machinery/Devices Industrial Electrical/Control Equipment Optical Equipment/Parts

    Nabeya Bi-tech Kaisha (NBK)

  • Special material screws Special material screws
    • Catalogue
    • Distributor required
    • Partnership required

    Great heat-resistance, anti-corrosion and chemical resistance

    Target industry: Industrial Electrical/Control Equipment Medical Instruments Scientific/Physics and Chemistry Instruments

    Nabeya Bi-tech Kaisha (NBK)

  • NK-1500 Male Threaded Type NK-1500 Male Threaded Type
    • Catalogue
    • Distributor required
    • Partnership required

    This model is assembled with fixed male fitting at both ends. [Point] ・Any types of standards and special specifications are available. ・We can choose tube from 3 different types.

    Target industry: Industrial Electrical/Control Equipment Energy Electricity/Gas/Water

    NANGOKU FLEXIBLE HOSE INDUSTRY CO., LTD.

  • Antistatic agent “DS-880” Antistatic agent “DS-880”
    • Catalogue

    Added to washing water at the washing process, the DS-880 produces an antistatic effect. It is used to remove dust before pattern forming or resist curing. The effectiveness lasts for about 2 weeks, which can be extended by applying heat treatment.

    Target industry: Consumer Electrical Appliances Electrical/Electronic Parts Industrial Electrical/Control Equipment

    Daido Sangyo Co., Ltd.

  • Mitsubishi Materials' Antenna Products Mitsubishi Materials' Antenna Products
    • Catalogue

    Surface mountable dielectric chip antennas are result of harmonizing our long experience in ceramic material & process technologies for high frequency applications together with cutting-edge RF design technologies. It is very small with low profile, but has a wide range of frequency band. It is suitable for compact mobile equipment and communication modules. Chip antenna •Very small •High gain •Omni-directional •Can adjust to different frequencies by using an external tuning circuit Antenna Unit •very small •The antenna unit has a chip antenna with a matching circuit and a coaxial cable. •It is a design-free board and can reduce a development cost and initial cost.

    Target industry: Information/Communication Devices Automotive Parts Industrial Electrical/Control Equipment

    Mitsubishi Materials Corporation Electronic Components Division

  • Axial color ring inductor Axial color ring inductor
    • Catalogue
    • Distributor required
    • Partnership required

    Features: *Design to be compact, small and light-weight *Wide range of inductance *Contribute to be high Q and self-resonant frequencies *Tapping type that is convenient for automatic insertion *Coating epoxy resin that ensure the humidity resistance to be long life *Low Cost Applications: *Electronics products *Communications equpments *Computer Devices *TV, VCR *Battery charger

    Target industry: Electrical/Electronic Parts Consumer Electrical Appliances Industrial Electrical/Control Equipment

    P&Z Electronic (Dongguan) Co., Ltd

  • Ceraflex-A (Zirconia Substrate/Wafer) Ceraflex-A (Zirconia Substrate/Wafer)
    • Catalogue

    We provide you a highly flexible Zirconia substrate "Ceraflex-A" by our original material development and manufacturing technology. If you have any questions , Please push " Inquiry ".

    Target industry: Electrical/Electronic Parts Industrial Electrical/Control Equipment Consumer Electrical Appliances

    JAPAN FINE CERAMICS CO., LTD.

  • Odor eliminator “Airpurifier” Odor eliminator “Airpurifier”
    • Catalogue

    With its cutting-edge PACT technology, the Airpurifier degrades and reforms odor-producing substances and perfectly eliminates unpleasant odors and dust. The simultaneous activation of plasma and photocatalysis under atmospheric pressure efficiently degrades and reforms organic compounds which cause odors. The Airpurifier is ideal for any odor issues! [Applications] • In the medical, nursing care and livestock industries • For unpleasant-odor improvement at hotels and restaurants • For countermeasures for odor problems at production sites (against organic solvents, etc.) • Smoking rooms and areas (tobacco odor prevention) * For details, please contact us or download our catalog.

    Target industry: Industrial Electrical/Control Equipment

    Airy Technology Ltd.

  • MΩ Meter MΩ Meter
    • Catalogue

    The model 3567A is MΩtester with a function oriented design which can cope with embadded system even with a single tester. Six ranges of test voltage from DC 25V to DC 1000V are available in this instrument and it is used in wide ranges of products like electronics components, sensors, batteries, various types of transformers etc.. Ten patterns of test conditions can be memorized and suitable option interfaces like RS-232C, RS-485, BCD output are availablefor the system.

    Target industry: Consumer Electrical Appliances Electrical/Electronic Parts Industrial Electrical/Control Equipment

    TSURUGA ELECTRIC CORPORATION

  • DC Ohm Meter DC Ohm Meter
    • Catalogue

    The model 356G is a low resistance meter from rance 30mΩ to 300mΩhaving capability of 5 measuring ranges at DC 1A with temperature measurement function which can measure temperature from -19.9 to 199.9℃. The measurement of 30mΩis possible to measure at DC 1A with 0.1μΩresolution. Enhancing the temperature measurement function with temperature correction function and ratio display function, comparator function is also equipped in standard product in order to make smooth components selection. Interface with RS-232C, USB, RS-485 and BCD are available making easy set up for the system products.

    Target industry: Consumer Electrical Appliances Electrical/Electronic Parts Industrial Electrical/Control Equipment

    TSURUGA ELECTRIC CORPORATION

  • Withstand Voltage and Insulation Tester Withstand Voltage and Insulation Tester
    • Catalogue

    The withstand voltage test and insulation resistance test can be carried out automatically in Model 8505. It can perform withstand voltage test without giving unnecessary stress to the test object with rise time and fall time setting functions. The insulation resistance test is availabe with fuction which can discharge the electric charge stored on the test object automatically after the end of test. It is high speed response type instrument where the test time setting can be set from 0.1 sec for withstand voltage test and 0.2 sec for insulation resistance test. Memory fuction is available for 16 patterns of test conditions and test can be conducted contineously. Three types of interfaces like USB, RS-232C and remote I/O are available in standard equipments making easy process for the system development.

    Target industry: Consumer Electrical Appliances Electrical/Electronic Parts Industrial Electrical/Control Equipment

    TSURUGA ELECTRIC CORPORATION

  • TL-344 Magnetic Catch TL-344 Magnetic Catch
    • Catalogue
    • Distributor required
    • Partnership required

    Since magnet is enclosed inside the plastic, there is no contamination from magnetic powder. * For more information, please feel free to contact us or download the catalog.

    Target industry: Industrial Electrical/Control Equipment

    TOCHIGIYA CO., LTD.

  • Low dust generation jack  Jack Ace series, Clean jack Low dust generation jack Jack Ace series, Clean jack
    • Catalogue

    A new clean model (low dust generation type) has been added to our popular Jack Ace series. [Features of jacks] • Able to retain screw shaft even during unexpected power cut with its self-locking mechanism using trapezoidal screws • Grease lubrication is applied for 2kN ~ 10kN, and oil bath for more than 25kN to worm speed reduction parts, guaranteeing high-speed operation • Ideal bearing structure and high performance. A wide range of 2kN ~ 1250kN come as standard. [Features of clean jacks] • Microdent plating with anti-corrosion effect has been applied to the screw shaft • Suppress dust generation by applying clean grease coating • Electrolyte nickel plating with anti-rust effect is applied to the input shaft • Stainless steel, with its anti-rust effect, is used for the main body and screw cover • Urethane-based coating (casting) and anodizing (aluminum casting) are applied to the casting bodies • Customization to meet your specifications is available, (for example, using different grease for food and pharmaceutical uses).

    Target industry: Industrial Machinery/Devices Consumer Electrical Appliances Industrial Electrical/Control Equipment

    MAKISHINKO CO.,LTD.

  • Highly efficient and high-speed reduction ratio type  Double-speed worm reduction gear MAH Series Highly efficient and high-speed reduction ratio type Double-speed worm reduction gear MAH Series
    • Catalogue

    With our many years of experience and advanced technologies, Makishinko, a leading worm reduction gear manufacturer, has added new products to the MA series: highly efficient gears with high-speed reduction ratio “double-speed worm reduction gear (MAH)”. [Features] • Compared to other types of gears, worm reduction gears offer smooth, quiet operation as sliding conduction is utilized. • Between centers: a range of 50mm ~ 160mm • Speed reduction ratio: 1/100 ~ 1/3600

    Target industry: Resin/Plastic/Rubber Products Industrial Machinery/Devices Industrial Electrical/Control Equipment

    MAKISHINKO CO.,LTD.

  • Printed Circuit Board for LED providing high brightness and high heat radiation Printed Circuit Board for LED providing high brightness and high heat radiation
    • Catalogue

    We offer best solutions to heat radiation issue by various kinds of circuit design, material selection, and plating method. Our lineup is : High radiation metal PCB/High brightness and radiation reflector PCB/ High radiation multilayer PCB/High radiation thick cupper PCB

    Target industry: Consumer Electrical Appliances Industrial Electrical/Control Equipment

    SATOSEN CO.,LTD.

  • Miki Pulley Clutch and Brake Units Miki Pulley Clutch and Brake Units
    • Catalogue

    Multiple numbers of clutches and brakes are used when designing complex mechanisms. You can select them individually, but it’s often much easier if you choose clutch and brake units which are designed to enable the operations you are expecting. We also provide various clutch and brake units with motors and speed reducers combined.

    Target industry: Automotive/Transport Machinery Industrial Machinery/Devices Industrial Electrical/Control Equipment

    MIKI PULLEY (HONG KONG) CO., LTD.

  • MST products “MST sintered parts’ MST products “MST sintered parts’
    • Catalogue

    Large sintered parts with high mechanical strength can be provided in small lots and at low cost using an MST technique that encompasses all steps of the manufacturing process from filling through molding to sintering. [Features] - A unique technique using a large multistage CNC molding press system that encompasses all steps of the manufacturing process from filling through molding to sintering. - The mechanical strength is close to that of the ingot material. - Parts can be made with better accuracy than with conventional mechanical molding presses. * For details, please contact us or download the catalogue.

    Target industry: Automotive/Transport Machinery Industrial Machinery/Devices Industrial Electrical/Control Equipment

    MIKI PULLEY (HONG KONG) CO., LTD.

  • Overload detector “Torque limiter” Overload detector “Torque limiter”
    • Catalogue

    Torque limiters detect overloads immediately to shut off input and output to protect machines. Overloads are detected accurately and the drive key removed from the groove to cut off input and output. Once the overload is resolved, operation can continue automatically at the same torque from the same indexing position. Torque is set using a built-in torque spring, so there is no troublesome fine-tuning. Torque limiters also serve as flexible couplings, and can be used either by butting two shafts together or by wrapping. Since power is transmitted by a drive key, they can be used safely even in oil. [Features] - Overloads are accurately detected - Accurate reactions protect machines from damage caused by overloads * For details, please contact us or download the catalogue.

    Target industry: Automotive/Transport Machinery Industrial Machinery/Devices Industrial Electrical/Control Equipment

    MIKI PULLEY (HONG KONG) CO., LTD.

  • Cylindrical linear motor “Linear shaft drive” Cylindrical linear motor “Linear shaft drive”
    • Catalogue

    Linear shaft drives are new cylindrical linear motor systems that were designed to enable driving with the simplest possible system. As drives can detect position using flux generated by the shaft, they operate without external position sensors. The built-in position sensors detect magnetic pole positions directly, allowing thrust to be generated soon after startup without the need for external magnetic pole detectors. The drives also have built-in positioning functions that enable relatively complex positioning operation even without external controllers. [Features] - No linear scales required - Come with built-in positioning functions - Anti-dust and water-proof - Automatic magnetic pole position detection * For details, please contact us or download the catalogue.

    Target industry: Automotive/Transport Machinery Industrial Machinery/Devices Industrial Electrical/Control Equipment

    MIKI PULLEY (HONG KONG) CO., LTD.

  • Couplings “Schmidt coupling” Couplings “Schmidt coupling”
    • Catalogue

    When transmitting power between shafts with different centers, which have traditionally consisted of a spline shaft and a universal joint, Schmidt couplings can be used to efficiently transmit power in a compact form. Schmidt couplings are couplings with different shaft centers that use the crank motion of a link. Power input at one end disc is transmitted via a link and center disc to another end disc. The amount of displacement of the shaft center is determined by the length of the link, so not only is it possible to transmit power between different shaft centers, but translation of shaft centers during rotation is possible as well. [Features] High parallel misalignment * For details, please contact us or download the catalogue.

    Target industry: Automotive/Transport Machinery Industrial Machinery/Devices Industrial Electrical/Control Equipment

    MIKI PULLEY (HONG KONG) CO., LTD.

  • Resin Washer Resin Washer
    • Catalogue

    We provide "Flat washer", "Set washer" and "Rosette washer" as "Resin washer". A wide variety of items, small lot and short lead time are offered. ●For the details, please inquire or download the catalogue.

    Target industry: Automotive/Transport Machinery Industrial Electrical/Control Equipment Electrical/Electronic Parts

    Hirosugi-Keiki Co., Ltd.

  • Mipox Diamond Paste Mipox Diamond Paste
    • Catalogue

    Mipox is a market leader in the development of added-value and high performance diamond paste. High quality abrasive diamond grains are carefully chosen. With its uniform dispersing capacity, the best surface finishes and high-precision mirror surfaces can be obtained very efficiently.

    Target industry: Automotive/Transport Machinery Machine Parts Industrial Electrical/Control Equipment

    Mipox Malaysia Sdn Bhd

  • DETERGENT for general applications DETERGENT for general applications
    • Catalogue

    Mipox is a market leader in the development of high value-added and high performance water detergent. Our company is ISO9001 certified and our product is manufactured in a clean room environment.

    Target industry: Automotive/Transport Machinery Machine Parts Industrial Electrical/Control Equipment

    Mipox Malaysia Sdn Bhd

  • VARIOFILM (electrostatic films) VARIOFILM (electrostatic films)
    • Catalogue

    VARIOFILM achieves high polishing/finishing performance and can be used for a variety of purposes. Tough polyester films whose thicknesses are uniform and even and electrostatic-coated abrasive grains result in even and stable polishing performance. Now a product with improved grip on its rear surface created by a special process is part of our new line-up. ※Please contact us or check our catalogue for more details.

    Target industry: Industrial Electrical/Control Equipment Electrical/Electronic Parts Resin/Plastic/Rubber Products

    Mipox Malaysia Sdn Bhd

  • Mipox Precision Polishing Film Mipox Precision Polishing Film
    • Catalogue

    - Offering excellent high precision finishing and greater lot-to-lot uniformity - Water and oil resistant - Curve polishing also available - Automatic polishing by machines is possible, yielding consistent polishing results - A wide product line-up, including aluminum oxide and diamond - Full line-up in the range from #320 to #20000

    Target industry: Precision Equipment Industrial Electrical/Control Equipment Electrical/Electronic Parts

    Mipox Malaysia Sdn Bhd

  • Ultra-hard and low abrasion DLC coating film “DLC-UM” Ultra-hard and low abrasion DLC coating film “DLC-UM”

    The DLC-UM is a coating film with more than double the hardness of standard DLC (Diamond Like Carbon, about 3000Hv), approaching much closer to the hardness of diamonds. Using solid graphite as its raw coating material, the DLC-US removes impurities with a special filter. High-quality coating with great durability and high intensity. It effectively supports machine tools or molds more durably. 【Features】 ■ Hardness of 7000Hv (Conventional versions have about 3000Hv) ■ Great resistance to abrasive wear ■ More than 100°C higher oxidation resistance! 【Applications】 Small-diameter drills for aluminum cutting/Copper alloy punching/Ultra-precision molds, etc. ※ For details please contact us or download our catalogue.

    Target industry: Consumer Electrical Appliances Industrial Electrical/Control Equipment Resin/Plastic/Rubber Products

    Chiyoda Manufacturing Services Malaysia Sdn. Bhd.

  • Spring actuated brake BXW Spring actuated brake BXW
    • Catalogue

    Among other electromagnetic clutches and brakes, the BXR model is a spring-close type. When the coil is de-energized, springs create force in the stationary disc to control motion--useful for emergency motion control in case of power failure, etc. To satisfy various customer needs, the BXW model comes in 4 different types: 3 models with the same dimensions but different torque loads, and 1 type particularly for servomotors. From the start, their torque satisfies rated values and no pre-conditioning run is required. Compliant with RoHS requirements, which restrict the use of 6 hazardous elements, including mercury or lead, in the EU market.

    Target industry: Industrial Electrical/Control Equipment Medical Instruments Industrial Machinery/Devices

    MIKI PULLEY (HONG KONG) CO., LTD.

  • Spring actuated brake BXR Spring actuated brake BXR
    • Catalogue

    Among other electromagnetic clutches and brakes, the BXR model is a spring-close type. When the coil is de-energized, springs create force in the stationary disc to control motion--useful for emergency motion control in case of power failure, etc. From the start, torque satisfies rated values and no pre-conditioning run is required. Very thin, 2/3 of existing models, featuring a flat design without any projections. Conventionally, the lead wires come out in the diameter direction, but in this model it is towards the shaft. By employing a lighter rotor, idling friction and inertia are lowered, making it ideal for use with servomotors or robots. Compliant with RoHS requirements, which restrict the use of 6 hazardous elements, including mercury or lead, in the EU market.

    Target industry: Industrial Electrical/Control Equipment Medical Instruments Industrial Machinery/Devices

    MIKI PULLEY (HONG KONG) CO., LTD.

  • NABCO Sanitary Control Automatic Doors NABCO Sanitary Control Automatic Doors
    • Catalogue
    • Distributor required

    Nabco provides optimum automatic door systems suitable for various locations such as food processing plants and hospitals where sanitary control is required. Due to changes in eating habits, the internationalization of the production and distribution of farm products, and the increase of imported food, the number of different types of food poisoning affecting consumers has been on the rise. The types of food poisoning related to sanitary control such as food poisoning caused by Salmonella, O157, and staphylococcus aureus have been increasing year by year. Taking measures to prevent incidents such as the inclusion of foreign materials in food is also very important. Nowadays, many food manufacturers are adopting a new quality control system called HACCP. In addition, hospitals and similar facilities are constantly subject to the risk of intramural infection. In response to this, they need to adopt effective sanitary control systems. Being optimized systems, NABCO automatic doors not only both open and close, they also contribute to the sanitary control of various sites such as food processing plants and hospitals.

    Target industry: Construction Industrial Electrical/Control Equipment Public Governance/Social Organization

    Nabtesco Corporation

  • Petrolatum corrosion-resistant tape “Petra Tape” Petrolatum corrosion-resistant tape “Petra Tape”
    • Catalogue

    Petra Tape provides much better corrosion- and rust-prevention than conventional painting, and is easily applied by wrapping or attaching it to the desired part. Typically, parts must be repainted every 5 to 7 years, but Petra Tape can be used for long periods of time simply by inspecting it every 10 years and maintaining only the parts that need repair. This greatly reduces the time and cost required. [Characteristics] - Great, long-lasting corrosion- and rust-prevention is provided simply by wrapping - Shuts out water and air - For details, please contact us or download our catalogues.

    Target industry: Industrial Machinery/Devices Industrial Electrical/Control Equipment Consumer Electrical Appliances

    Yamauchi Malaysia Sdn.,Bhd.

  • High-Performance Vibration Dampers High-Performance Vibration Dampers
    • Catalogue

    Suppressing Compressor Vibration in Refrigerators, Air Conditioners, Etc. Refrigerators, air conditioners, washing machines and other equipment contain compressors that cause large vibrations when operated. High-performance vibration dampers are essential for suppressing this type of vibration, to maintain product performance, and to prevent vibrations from affecting our living environments. Also, because these kinds of products often spend days in transport before reaching the customer’s location, they must be durable enough to withstand extreme vibration. By applying a wide range of materials based on a wealth of vibration-resistant research and advanced analytical simulations accumulated over the years, Yamauchi has produced optimal vibration-resistant rubber designs, and offers high-quality parts that are backed by thorough quality control, all the way from the manufacturing stage to the inspection process.

    Target industry: Industrial Machinery/Devices Industrial Electrical/Control Equipment Resin/Plastic/Rubber Products

    Yamauchi Malaysia Sdn.,Bhd.

  • Food grade machinery lubricant Bio Adneil Food grade machinery lubricant Bio Adneil
    • Catalogue

    Food grade machinery lubricant Bio Adneil is a 3H product certified by NSF International (National Sanitation Foundation International). Bio Adneil is safe to use even in contact with food, often used as a release agent at food processing places. For more details, please contact us or download our catalogues.

    Target industry: Machine Parts Industrial Electrical/Control Equipment Industrial Machinery/Devices

    Dainichi Hanso Co. Ltd.

  • AION PVA Sponge A-type AION PVA Sponge A-type
    • Catalogue
    • Distributor required
    • Partnership required

    - Pore sizes from 50 to 700μm with porosity of approx. 90% and its interconnected pore structure make the A-series ideal as a low pressure drop filter, or to absorb and retain high-capacity liquids.

    Target industry: Machine Parts Resin/Plastic/Rubber Products Industrial Electrical/Control Equipment

    AION Co.,Ltd. Malaysia Regional Office

  • Ring gauge (Ceramic) Ring gauge (Ceramic)
    • Catalogue

    - Compared to steel, greater anti-abrasion, more durable over time with no dimensional changes - No rust or corrosion, easy maintenance - Contains no magnetic materials so no worries about magnetization - Less plastic deformation caused by scratches and dents, with no burrs or swellings - Light-weight and provides easy measurement - Ring sizes are laser marked on gauges

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices

    Niigata seiki Co.,Ltd.

  • Ring gauge (Steel) Ring gauge (Steel)
    • Catalogue

    Used as master gauges for zero adjustment of hole-test, cylinder gauge, inside micrometer, dial caliper, inner diameter measuring, inner dial comparator, etc.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices

    Niigata seiki Co.,Ltd.

  • Pin gauge set (Ceramic) Pin gauge set (Ceramic)
    • Catalogue

    Made of ceramic with great durability! Anti-rust! Provides overall cost reduction.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices

    Niigata seiki Co.,Ltd.

  • Pin gauge set (Steel) Pin gauge set (Steel)
    • Catalogue

    Individual pin gauges are available. JCSS adjustments can be applied. For customized gauges, please feel free to contact us.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices

    Niigata seiki Co.,Ltd.

  • Pin gauge with maintenance-line AML series Pin gauge with maintenance-line AML series
    • Catalogue

    With maintenance-line checking for wear and tear, it’s easy to spot any damage to the tip. Sub-zero treatment applied.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices

    Niigata seiki Co.,Ltd.

  • Aluminum pin vice Aluminum pin vice
    • Catalogue

    “Can’t we grip 2 sizes with just one pin vice...?” “When tightened once, the collets get deformed.... Is there any solution?” “I’m worried about damaging the pin gauge!” If you have concerns such as these, try our pin vice!

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices

    Niigata seiki Co.,Ltd.

  • LEVELNIC DL-S3 LEVELNIC DL-S3
    • Catalogue

    For high-accuracy leveling, straightness and flatness measurement of surface plates, machine tools, etc. Quick measurement with maximum resolution of 0.001mm/m with no data reading errors.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices

    Niigata seiki Co.,Ltd.

  • LEVELNIC DL-S2W LEVELNIC DL-S2W
    • Catalogue

    For high accuracy leveling, straightness and flatness measurement of surface plates, machine tools, etc. Quick measurement with maximum resolution of 0.001mm/m with no data reading errors. Wireless system is standard.

    Target industry: Measurement/Analytical Instruments Industrial Machinery/Devices Industrial Electrical/Control Equipment

    Niigata seiki Co.,Ltd.

  • Taper gauge Taper gauge
    • Catalogue

    Quick measurement of grooves or gaps!

    Target industry: Measurement/Analytical Instruments Industrial Machinery/Devices Industrial Electrical/Control Equipment

    Niigata seiki Co.,Ltd.

  • SENQCIA CORPORATION/SBRC Roller chain SENQCIA CORPORATION/SBRC Roller chain
    • Catalogue
    • Distributor required
    • Partnership required

    In 1987, SENQCIA CORPORATION introduced the first premium line of solid bushing & roller (SBR) chain. Since then, Hitachi Metals Techno has continuously endeavoured to upgrade our products. In 2009 Hitachi Metals Techno went into full production of the new SBR series of roller chain across the standard range.

    Target industry: Automotive/Transport Machinery Consumer Electrical Appliances Industrial Electrical/Control Equipment

    SENQCIA CORPORATION

  • DC Brushless Canned Turbine Vortex Pump DC Brushless Canned Turbine Vortex Pump
    • Catalogue

    The DC brushless canned turbine vortex pump is 1⁄2 the size and 1/3 the weight of existing pumps. It’s compact but still generates high pressure. Smaller size allows more flexible installation. Suitable for use in aircraft, where light-weight devices are required to avoid excess weight, or as in-vehicle equipment, or to be mounted on moving parts. [Features] - Max flow: 20L / min - Max discharge rate: 0.6MPa - No leakage with seal-less structure - Maintenance free and reliable - Rotating number control is a standard feature For details, please contact us or download our catalogue.

    Target industry: Automotive/Transport Machinery Industrial Machinery/Devices Industrial Electrical/Control Equipment

    Nikuni Co., Ltd.

  • Zirconia oxygen sensor TB-IIF Zirconia oxygen sensor TB-IIF
    • Catalogue
    • Distributor required
    • Partnership required

    TB-IIF is an oxygen sensor whose detective element is made of Zirconia electrolyte. The sensor works as oxygen analyzer together withour control unit.The main use of this sensor is for measurement of trace or low oxygen in inert gas, moreover for dirty gas such as flue gas can be used well. Our TB-IIF has many features such as followings. ・Wide range application, from 1ppm to 100%O2. ・Built-in multi-filter protects detector from dirt and corrosion. ・Accepts 0.2 to 5 L/min flow rate. ・Simple structure, easy maintenance. Please feel free to contact for details or refer the brochure.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Precision Equipment

    Daiichinekken co., ltd.

  • Ultrasonic gas analyzer US-IIT-SH Ultrasonic gas analyzer US-IIT-SH
    • Catalogue
    • Distributor required
    • Partnership required

    US-IIT-SH can measure High concentration of Hydrogen and Helium at the range of 0~100%. This US-IIT-SH is an ultrasonic gas analyzer which is used ultra sonic element in detective part.Ultrasonic gas analyzer can theoretically measure all kinds of mixture of two gases.It becomes enabled 0-100% of measurement ranges of Hydrogen gas and the Helium gas though conventional model could measure at the range of only 0-50%. Please feel free to contact for details or refer the brochure.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Precision Equipment

    Daiichinekken co., ltd.

  • Ultrasonic gas module US-100-5VS/12VS Ultrasonic gas module US-100-5VS/12VS
    • Catalogue
    • Distributor required
    • Partnership required

    This US-100-5VS/12VS is a sensor module which is used ultra sonic element in detective part.Ultrasonic gas analyzer can theoretically measure all kinds of mixture of two gases. There are no consumables and it is long-lasting. Calibration and maintenance are unnecessary for a long time. And because warm-up is not necessary and measurements can be done the moment the power is supplied. Please feel free to contact for details or refer the brochure.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Precision Equipment

    Daiichinekken co., ltd.

  • Control unit C-28C C-48 Control unit C-28C C-48
    • Catalogue
    • Distributor required
    • Partnership required

    This is an instrument which convert the electric signal, display and output.Control unit C-28C and C-48 should be combined with O2 sensor then control cell temperature and convert cell EMF to O2 value for display and signal output. They have many features such as folloings. ・Compact DIN size. (96mm×96mm) ・Easy to handle. ・Readable large display. ・Serial communication function (RS232C) is normally equipped. Please feel free to contact for details or refer the brochure.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Precision Equipment

    Daiichinekken co., ltd.

  • Built-in type Zirconia oxygen analyzer TB-WI Built-in type Zirconia oxygen analyzer TB-WI
    • Catalogue
    • Distributor required
    • Partnership required

    You can use this model widely for from ppm measurement to 100% oxygen by using only this model. TB-IIF is a built-in type oxygen analyzer whose detective element is made of Zirconia electrolyte. TB-IIF-P sensor and C-101 control unit are installed altogether in a box for portable uses.TB-WI has many features such as followings. ・Reasonable price ・Wide range application, from 1ppm to 100%O2. ・Output range can select freely. ・Serial communication function is equipped normally. ・85V~264VAC power supply can be applied. Please feel free to contact for details or refer the brochure.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Precision Equipment

    Daiichinekken co., ltd.

  • Compact machining canter SPEEDIO S700X1/ S500X1/ S300X1 Compact machining canter SPEEDIO S700X1/ S500X1/ S300X1
    • Catalogue

    The SPEEDIO maximizes productive efficiency improvement of mass-production parts such as automobile, motorcycle and information technology.

    Target industry: Industrial Electrical/Control Equipment

    Brother Commercial Thailand, LTD. Machine Tools Technical Center

Industry

PAGE TOP