Japan Products and services

[Newly releasing!] Mold Cooling Pipe Cleaning Machine Water Reamer Series "WR-35-AFIII"

Removes heavy rust and layers of impurities deposited by water inside pipes and restores cooling efficiency. It is a revolutionary cleaning method, because - Removes heavy rust and layers of impurities deposited by water inside pipes and forms a rust preventing coating at the same time. - Allows maintenance of cooling water pipe interiors without degradation. Dust is not generated. - Thanks to blown-air drying system, no flushing with water or neutralization is required after cleaning. - Due to its closed safety system, derusting water is not discharged. - Hardly any sludge, which can clog pipes after cleaning, is generated.

Target industry: Electrical/Electronic Parts Optical Equipment/Parts Resin/Plastic/Rubber Products

SOMAX CO., LTD.

• View details
• Catalogue

VCC-HD1000 (Color)

VCC-HD1000 is a Full HD color camera module utilizing a 35mm full size CMOS image sensor. Video output 1080 60p/59.94p/50p (3G-SDI), 1080 60i/59.94i/50i/30p/29.97p/25p/24p/ 23.98p (HD-SDI), 720 60p/59.94p/50p (HD-SDI) are corresponded. [Features] ■ Features CIS original ISP, state-of-the-art “ClairvuTM” for superb imaging quality. ■ Infrared-level of high sensitivity. ■ GenLock function (Black burst or 3-value SYNC). ■ Camera can be controlled by RS-232C and RS-485. ■ LTC (Longitudinal Time code). ■ OSD (On Screen Display) function can be set by connecting an optional remote controller. It is said that the luminance level of starlight is 0.001lux. VCC-HD1000 can capture the light at 0.0005lux at F1.2 setting. Therefore, this model can be used under the environment darker than the starlight. Packed with versatile functions suitable to use for particular application such as surveillance, ITS, night shooting, etc.

Target industry: Medical Instruments Forestry Media

CIS Corporation

• View details
• Catalogue

Industrial Robots Product Lineup

Please review our extensive range of industrial robots

SHIBAURA MACHINE CO., LTD.

• View details
• Catalogue

VCC-25CXP1MPS(B/W) / VCC-25CXP1RPS(Color)

[CIS Pixel-shift Technology] This is a technology which increase the resolution of image sensor by shifting X and Y axes between the sensor’s pixel pitch 4 times in each direction, capturing images at each position, and synthesizing them to create a single image. With VCC-25CXP1MPS, equivalent to 100M pixels resolution can be acquired by 4 times shifting, and equivalent to 400M pixels resolution can be acquired by 16 times shifting. The camera is suitable for the applications which requires super-high resolution such as inspection, research/analysis, medical, archive, etc. For more information, please download our product catalog or contact our sales division.

Target industry: Other Medical Supplies/Biotechnology Measurement/Analytical Instruments

CIS Corporation

• View details
• Catalogue

L-38-150 Large Spindle Drill Rig "Megalo"

L-38-150 "Megalo" drill can handle large diameter Rod and Casing through its spindle I.D. 145mm, having enjoyed high prestige in Japanese market over long years with its versatility from high speed coring to tricone bit work. Optional L-Frame model is for larger diameter up to 900mm in water well drilling, etc.

NLC Co., Ltd.

• View details

L-38-98 High Speed Diamond Core Drill Rig　Made in Japan

L-38 High Speed Core Drill Rig is renound model in the world for mineral exploration / soil investigation up to 565m throughout the world, equipped with 98mm Spindle Head and 8-step transmission for proper working speed.

NLC Co., Ltd.

• View details

JGNL-20 Automatic Grouting Drill Rig "Endless Drill"

Designed for automatic jet grouting construction, especially for cement column making. Twin Spindle Heads realize continuous drilling/ pulling up a string and step-up jet grouting operations in one drill string in accordance with set program as required. This specific structure brings about more of productivity - reduction of time and labor in comparison with ordinary machines.

NLC Co., Ltd.

• View details

DCC-RGBD1 (ToF+RGB camera)

This is a twin-lens board camera which integrates ToF camera and RGB camera. With ToF camera, not only the distance can be measured and acquired by using near-infrared light emitted from the camera, but also can acquire color YUV image. Also, because of its superb real-time performance, DCC-RGBD1 contributes to the applications of robot vision, automated driving, logistics, security, medical care, nursing care, etc. [Features] ■ToF camera development kit Provides exe control software and ROS driver package for acquiring images and controlling the camera. ■Acquires information on RGB and Depth by one camera ・Synchronizes and outputs YUV+D information by using on-board FPGA. ・Corresponds to a seamless measurement in the range of 30cm～5m at Wide Range mode.（At Super Near mode：15～70cm, At Wide mode：30cm～5m） Accuracy：Error±2mm (@15cm),Error±10mm（@5m） (Accuracy when compositing 100 images） ■Small footprint/USB3.0 interface utilized 55(W)×50(H)×35(D)mm USB3.0 UVC (Power feeding is not supported) A cable for power supply is supplied as an accessory.

Target industry: Automotive/Transport Machinery Measurement/Analytical Instruments Transportation/Logistic/Warehouse

CIS Corporation

• View details
• Catalogue

NL-26 Portable/Compact Drill Rig

NL-26 is a portable and compact drill rig equipped with Hydraulic Chuck with 6-step gearing system for precise drilling speed adjustment. Max. Dissassembly weight is 60kg, No Oil leakage, and Portability for mountainous job sites are primary features.

NLC Co., Ltd.

• View details

NL-G80/NL-G80ⅡCompact/Portable Hydraulic Top Drive Drill Rig

Developed as a cost efficient solution for users requiring a portable drill for shallow coring, Geo technical and Tri-cone rotary drilling applications.　 NL-G80Ⅱ- modified model with 2-step head gear for high speed coring – / NL-G150 with power-increased model are also offered. Equipped with Hydraulic Top Head drive and variable speed motors within the range of 50 to 800 rpm. Highly productive with its 1.7 m feed stroke.

NLC Co., Ltd.

• View details

NL-55 Drill Rig [1]Water well drilling [2]Geological Survey MADE IN JAPAN

Designed for greater depth with larger diameter for civil engineering works, mineral exploration up to 1,500m, water well, hot spring well, geothermal exploration with its spindle I.D. of 145mm diameter. Having gained a high reputation, especially around Asian market, NL-55 has been introduced and worked at major mining & drilling companies in several types of drilling operations.

Target industry: Construction/Mining Machinery Construction Mining

NLC Co., Ltd.

• View details

NL-500 Hydraulic Exploration 500m Core Drill, MADE IN JAPAN

NL-500 Drill was developed in pursuit of Safety Control, Labor Saving and Cost Efficiency, having drilling capacity up to 550m for mineral exploration, soil investigation, etc.　Gear Drive Head is strong and powerful unlike chain drive.

Target industry: Construction/Mining Machinery Mining Other

NLC Co., Ltd.

• View details

NL-700-V2 Hydraulic Exploration 700m Core Drill, MADE IN JAPAN

NL-700-V2 was developed in pursuit of Safety Control, Labor Saving,, Cost Efficiency, and High Productivity.　 Sliding Head erases downtime in dealing with larger casing without opening the head. Capable of wireline N size (69.9mm) drilling up to 700m of deep hole drilling (actual record : 940m in 60° angle hole drilling). Gear Drive Head is strong and powerful unlike chain drive.

Target industry: Construction/Mining Machinery Construction Other Manufacturing

NLC Co., Ltd.

• View details

[Simplified type] Motorized vertical test stand “MX Series”

The MX Series is a vertical motorized test stand for tension and compression measurements. You can conduct full-scale measurements at affordable prices. The MX-1000N for up to 1000N, the MX-5000N for up to 5000N. [Features] • Maintains stable speed and direction for highly replicable measurement • Used for a wide variety of tests, such as tension, compression and peeling • Over-load detection and load control when used with a force gauge * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

[Higher grade model] Motorized vertical test stand “EMX-1000N”

The EMX-1000N is a test stand which can be used as a simplified tension and compression tester when paired with a force gauge and various attachments. This model displays high rigidity with various setting options, ideal for a wide range of measurements. [Features] -Uniformly maintains speed and direction for highly replicable measurement -Easy option settings with a dial and monitor -Not only for tension and compression testing, but also suitable for peeling or friction coefficient measurement -High-end model in motorized vertical test stands 　Travel distance can be controlled with details like “Stop after X mm” 　Up to 5 sets of conditions can be stored for efficient measurement -Highly precise measurement with exceptionally rigid shaft 　Precision measurement with minimum deflection 　Accurate load-displacement measurement -Applicable to a wide speed range, various measurements can be done with just a standard model 　A wide speed range of 0.5 – 600 mm / min * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

[Standard model] Horizontal motorized test stand “MH2 Series”

The MH2 Series is a horizontal motorized test stand with easy sample placement. Uniformly maintains speed and load direction for highly replicable measurement. With digitally controlled design, setting of measurement modes and speeds is easy. Used with a force gauge, a wide variety of tests can be conducted. [Features] ■Horizontal load can be applied ■Easy sample placement and force gauge set-up ■Test speeds are digitally controlled for more accurate and reliable measurements ■Endurance tests can be done by setting the number of strokes to be performed and load retention time ■Forward and backward speeds for endurance testing can be individually set ■Overload prevention and load value control functions are available 　* Conditions apply * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

[Standard model] Motorized vertical test stand“MX2 Series”

The MX2 Series is a test stand which can be used as a simplified tension/compression tester when paired with a force gauge and attachments. Compared to measurement with a force gauge alone, results are more replicable. Imada offers over 50 force gauge models and over 100 types of attachments for test stands to provide optimal measurement solutions to our customers. [Features] ■Maintains uniform test speed and direction for highly replicable measurement. －Digital test speed setting －Applies straight load →Reduces inconsistency by different testers ■Endurance, repeat and various other tests －Endurance and repeat tests with timer and counter functions －Provides the following functions when used with ZTS/ZTA force gauge and CB-518 cable 　・Overload prevention 　・Controls movements by load values 　・Automatic start / recording of graph drawing ■Easy operation －Easy test speed and repeat cycle number settings with a dial and monitor ■Peeling tests / friction coefficient measurement －Not only for tension and compression testing, but also suitable for peeling tests and friction coefficient measurement

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

[Standard model] Analog force gauge “PS Series”

The PS Series analog force gauge is an easy-to-use accurate tension and compression measurement tool. Imada force gauges are manufactured with advanced technologies and long years of expertise under strict quality control, which maintains their high accuracy over time. Various models are available for a wide range of measurement. [Features] ■Cutting-edge design for hand-held use ■Light-weight robust aluminum alloy body ■Maintains high accuracy for a long time with our unique control mechanism and spring made of special material ■Stop-pin mechanism can perform peak measurement ■Compensates for the weight of attachments with zero-point adjustment mechanism ■Easy-to-read scale ■Comes with various attachments and a carrying case ■12-month warranty * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Imada “Data Analysis Software”

Imada Data Analysis Software generates real-time graphs from load data transmitted by the digital force gauge, connected to a PC with a USD or RS232C cable. Data management and analysis are easy. ■Benefits of using this software Processing data to graphs visualizes the load transition. Statistics are automatically generated, and data is saved. Data management becomes easy. [Our software] ●Force-Recorder (Standard/Light): load-time (torque-time) graph drawing software ●Force Recorder (Professional): load-displacement (torque-angle) graph drawing software ●Force Logger Plus: multiple force gauge data management software ●ZLINK4: load-time (torque-time) graph drawing software ●ZP Recorder: load-time graph drawing software ●F-S Recorder: load-displacement graph drawing software ●HCC-Easy: tension graph drawing software

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

[Standard model] Load cell for compression “LC Series”

The LC Series is a compact and lightweight load cell for compression. Easy installation and handling. With an airtight structure, this series offers great stability and reliability and can be used anywhere. Stainless steel (SUS630) material provides outstanding corrosion resistance. [Features] ■High-precision compression load cell ■Button-shaped, easy to place in narrow gaps ■For data output, connect to an amplifier * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

[Standard/High load model] Load cell for compression and tension “DPU Series”

The “DPU Series” is a load cell suitable for installation into equipment. It’s a rectangular parallelepiped that fits easily into facilities. Embedded screw holes make installation easier. For both tension and compression measurement. Set attachments to the male thread to use. A wide range of attachments is available. [Features] ■The indicator (amplifier) has various input and output functions ・ Select one of four indicators to display load values 1.Desktop model: FA Plus2 2.Sensor replaceable model: eZT * eZ-Connect series: eDPU is compatible with sensor replacement model eZT 3. Portable model (standard): ZTS separate type 4. Portable model (advanced): ZTA separate type ■The following settings are available in all indicators 　・ USB/RS232C/Analog, etc. 　・ Pass or fail judgment/peak values/overload, etc. ■Generates graphs using included software * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Desktop model amplifier for load cell “FA Plus2 Series”

The FA Plus2 Series is a desktop model amplifier for load cells. Its box-type design makes it easier to install into equipment. Provides a wide range of output functions, connecting to external equipment such as PLC is easy. According to the specifications of the connected external equipment or PLC, the baud rate (communication speed) can be adjusted, and output can be transmitted at 100 data/second via serial communication (RS-232C). At a sampling speed of 2000 cycles/second, sudden changes of force can be measured without error. [Features] ■Clear display, easy to use ■Pass or fail and speedy judgement ■Has a wide range of output functions ■Easy-to-install design ■Can be configured with industrial power supply (optional) * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Sensor interchangeable amplifier “eZT”

The “eZT” is a sensor-interchangeable amplifier. Load cells can be changed without any adjustment required. Based on the equipment and environment, replace load cells of different shapes and functions to perform routine various measurements. Can be kept as a spare sensor unit for everyday measurement. [Features] ■A wide range of applications ・Different types of force (compression and torque) can be measured by a single unit of eZT ・Measurement with a big gap between low and high load values can be handled by a single unit of eZT * Only one load cell at a time can be attached to an eZT. ■Cost savings ・Usually the same number of indicators (amplifiers) as the load cells is required. However, since eZT can be used with multiple load cells, you could save the cost of preparing the same number of indicators. ■Reduce processing risk ・Keeping a spare load cell, a malfunctioning one can be replaced immediately without stopping the line. * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Digital force gauge (load measuring tool) “DSV/DST Series”

The DSV/DST Series is a digital force gauge (load measuring tool) for hand-held use. To make operation simple and accurate, it comes with a variety of functions. If the force gauge detects any change in the tester’s holding position, a warning alarm sounds, indicating the need to check whether the load is still upright. In addition, during continuous measuring cycles, peak values are automatically updated and saved. This function contributes to improved work efficiency as it isn’t necessary to keep resetting and saving values after each measurement. [Features] ■Up to 30 hours of battery life ■Can be charged from PC or mobile batteries ■Easy data management with the included software ■Up to 10000N * For details, please refer to the product specifications or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Chip peeling fixture “GT Series”

The GT Series is a fixture for peel (shear) strength testing of electronic parts. Compact and lightweight, this series can be used for low load values and in narrow places. Easy measurement at low cost. GT-10: attach a hook to the chip to be tested, pull up and measure the peel strength GT-20: push the fixture against the chip and measure the shear (extrusion) strength [Features] ■Fixture for peel (shear) strength testing of electronic parts ■Compact and lightweight, suitable for low load values and use in narrow places ■Easy measurement at low cost * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Lead-free solder testing fixture “LF”

The LF is designed for solder strength testing of QFP lead joints using lead-free soldering. Comes with 2 types of tables at different angles of 45° and 90°. Accurate and fine positioning on a precision XY stage. You can perform tests compliant with JIS Z3198-6 (2003) “Test methods for lead-free solders Part 6: Methods for 45°pull test of solder joints on QFP lead” and JIS Z3198-7 (2003) "Test methods for lead-free solders Part 7: Methods for shear strength of solder joints on chip components” [Features] ■Fixture to measure tensile strength and shear strength of solder joints ■Accurate and fine positioning on a precision XY stage ■JIS compliant strength tests * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Flat chuck "GC series"

The GC Series is a multi-purpose flat chuck which can be used for thin to thick samples. As a tensile strength test chuck for various materials, it can be mounted on our force gauge. The opening is wide, suitable for various applications. Three types of selections for different load values and opening sizes. [Features] ■Wide opening for various applications ■Three different types for different loads and opening sizes ■Tensile strength measurement attachment which can grip from thin to thick samples * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Forming press test fixture “PR Series”

The PR Series is a fixture for pressure resistance testing of retort pouches, heat-sealing wrappers, general food wrappers, cardboard, etc. JIS standard compliant pressure resistance tests can be done when used with dedicated force gauge, test stand and connecting cable. (JIS Z0238:1998 standard partially compliant) [Features] •Accurate results with biaxial structure, which maintains samples in parallel for uniform load application •For endurance testing, use with our recommended product configuration to set test speed, repeat cycle number, load value, timer and other options for optimal performance * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Film puncture test fixture “TKS Series”

The TKS Series is a film puncture test fixture ideal for thin samples such as liquid crystal films, PET bottles, films, aluminum foils and metallic foils. When used with our force gauge and test stand, you can perform tests partially compliant with JIS Z1707(1997) “General rules of plastic films for food packaging, 7.4 Puncture test”. [Features] - TKS-20N: for thin films up to 20N, affordable range - TKS-250N: for liquid crystal films, aluminum foils, PET bottles and various other materials up to 250N 　Samples are held firmly on the table by rubber rings [Recommended product configuration] - Film puncture test fixture: TKS-20N (max. 20N) / TKS-250N (max. 250N) - Standard model digital force gauge: ZTS series - Motorized test stand: MX2-500N - Load control cable: CB-518 * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

[Horizontal model] Manual test stand “SH Series”

The SH Series is a manual test stand that uses the screw feed method to precisely adjust position for stable thrust. Horizontal table design allows easy sample placement. The SH-1000 comes with a cover to prevent contamination by sample fragments. The SH-3000 is suitable for strength testing of a variety of materials up to 3000N. [Features] ■Wheel-operated handle stand ■Horizontal table design for easy sample placement ■Screw feed method enables precise adjustment for stable thrust ■Designed to pair with various Imada force gauges * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Simplified manual test stand “SVL-1000N” “SVH-1000N”

Used with a force gauge, the SV Series can measure tension and compression up to 1000N. As test conditions are applied uniformly, highly replicable measurements are achieved. Load measurement is easily done by lever or handle operation. The SVL-1000N comes with a lever for better work efficiency. The SVH-1000N has a handle for great travel distance control. [Features] ■Up to 1000N of tension and compression load ■Stroke adjustment with mechanical stopper ■Applied to a wide range of measurements with various options ■Compact and lightweight, easy to carry [Features] ■SVL-1000N, lever type 　Easy lever operation, suitable for work efficiency improvement ■SVH-1000N, handle type 　Suitable for frequent travel distance adjustments (3mm / rotation) * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Food firmness measurement unit “FCA-DSV-50N Series”

The "FCA-DSV-50N Series" is a test stand which can perform a compression test with a fixed amount of pressure. Easy operation with lever. With included attachments, multiple actions can be applied: squash/push-in, cut/crack. In addition, the force gauge can be connected to a PC with a USB cable to transmit data. With the included software, the collected data is processed and managed. [Features] •Easy squashing force measurement with a fixed amount of pressure •Adjusts push-in amount with a knob •Easy operation with a lever, offering high replicability •During continuous measuring cycles, peak values are automatically updated and saved, contributing to better work efficiency •Force gauge can be connected to a PC with a USB cable •With the included software, data management is easy •Stainless steel for easy cleaning * For details, please download our PDF documents or feel free to contact us. [Video is now available] A video of firmness testing of cookies is available. Please have a look.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Rheometer (texture analyzer) “FRTS Series”

What is the bread fluffiness? What is the crunchiness of rice crackers? The FRTS series is a tester to evaluate, quantify and analyze food texture, important for R&D and quality control in the food industry. In addition to the included attachments, dozens more optional selections are available for different types of food. [Features] ■Target food Cakes, pastes and doughs, bread, rice (cooked/raw), noodles, beans (cooked/raw), eggs, meat and fish (cooked/raw), vegetables, fruits and many others ■Straightforward operation with user-friendly touch panel When selecting the food and the standard to be tested from the list, recommended test parameters are displayed Easy manual test parameter settings and registration ■Accurate and precise measurement High accuracy: ± 0.2% F.S. ± 1 digit High-speed sampling: 1000Hz, peak value of hard ingredients can be accurately obtained with high responsiveness ■Easy data management Easy graph drawing using the included software (load-time and load-displacement versions) Automatic calculation of hardness, adhesiveness, cohesiveness, adhesive force, elasticity, gum properties, etc. ■Easy to clean Stainless steel measuring unit with removable tray, easy cleaning [Video is now available] A video of food texture measurement is available.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Motorized torque stand “MTS Series”

The “MTS Series” is excellent at maintaining constant rotation speed, contributing to highly precise torque measurement. Applications include opening torque of PET bottles or pharmaceutical bottles, operating force of rotary switches and twisting strength of boards. The measurement provides high replicability of various rotating and twisting forces. Some options allow angle-torque analysis, which is useful for characteristic evaluation. [Features] ■Regulates the rotating speed for highly precise torque measurement ■Automatic testing based on the input parameters, measuring cap opening torque, angle-torque analysis (optional), etc., applicable for a wide range of measurements ■Offers testing of various samples with clamping attachments from our wide- ranging product lineup * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Driver torque meter “I Series”

The I Series is a driver torque meter for electric and torque drivers. Supports routine inspection with easy operation. Serial data output for data management. [Features] ■Torque measurement of electric and torque drivers ■Easy operation for routine inspection ■Serial data output for efficient data management * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Peel tester “IPTS-5N”

The IPTS-5N is a peel tester for embossed carrier tape, compliant with JIS standards. It provides high usability and accuracy. From placing the sample, measurement to generating graphs can be done in easy operations. With 6 speed settings, high speed testing is also achievable. Software is included for accurate graph drawing. [Features] ■Allows peel testing at high speed, a maximum speed of 1500mm/min ■Comes with drawing software to generate accurate graphs by processing data transmitted at 2000 data/second ■Embossed carrier tape peel testing partially compliant with JIS/IEC standards 　JIS C0806-3 (2014) “Packaging of Components for Automatic Handling” 　IEC 60286-3 (2013) “Packaging of Components for Automatic Handling” * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

[Video is now available] Automatic harness tester "ACT Series"

The ACT Series is an electric crimp terminal tensile strength tester. With this tester, crimping force of crimp terminals in wire harnesses can be easily measured. The operation is simple: with just a single button, measuring and saving data can be done, which dramatically improves the efficiency of harness testing. Partially compliant with JIS C 2805, JIS C 5402-16-4, UL 486A-486B standards. [Features] ■2 test modes are available: "Break” (pull and break) and “Keep” (with conditions of time and load values) modes ■Up to 26 sets of test parameters can be saved and used repeatedly ■Includes software for data management and condition settings on PC ■Offers testing partially compliant with: 　JIS C 2805 (2010) " Crimp-type terminal lugs for copper conductors, 7.11 tensile strength test" ※Other tests compliant with JIS/UL standards are available [Video is now available] A video of wire harness crimping (pull and break) test is available. Please have a look. * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Acupuncture needle strength and sharpness test attachment "MED-ACU-2N"

The MED-ACU-2N is an attachment to evaluate the strength and sharpness of acupuncture needles. Set the attachment to the force gauge, press the needle against the iron plate to check the strength, or pierce an aluminum foil sheet to test its sharpness. [Features] ■Attachment for strength and sharpness evaluation of acupuncture needles ■Needle sizes: φ0.1 to 1mm ■Partially compliant with JIS Standards testing * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Probe tack test attachment “MED-IS-20N”

The MED-IS-20N is a specified attachment for adhesive tack testing of adhesive plasters, etc. Used with a force gauge and test stand, it offers measurements partially compliant with some standards. [Features] ■Offers testing partly compliant with standards ・Partially compliant with ASTM D2979: 2016 “Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine” ・The Japanese Pharmacopoeia 6.12. (3.4.), 17th revision: “Probe tack testing” * When used with dedicated force gauge and test stand. * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Coating adhesion test fixture “TH Series”

The “TH Series” is a fixture for coating peel adhesion tests. It works through bonding its peeling head onto a coated surface and pulling it off. When used with dedicated force gauge, test stand and cable, we can offer testing systems partially compliant with specifications laid out in JIS K 5600-5-7(1999) “Testing methods for paints Part 5: Mechanical property of film, Section 7: Adhesion test (Pull-off method)” or ISO 4624(2002). [Features] ■Bond its peeling head onto a coating surface and pull it off to test the adhesion strength ■Offers testing systems partially compliant with JIS and ISO Standards * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

90° peel testing table "P90-200N Series"

The “P90-200N Series” is suitable for 90° peel tests on adhesive tapes, sheets affixed to substrates. When used with dedicated force gauge, test stand, cable and software, we can offer testing systems compliant with a part of JIS Z0237:2000 “Testing methods of pressure-sensitive adhesive tapes and sheets, 10. Adhesive strength” or JIS C5016: 1994 “Test methods for flexible printed wiring boards, 8.1 Conductor Peeling Strength”. [Features] ■The slide table moves along with the test stand to keep the peeling surface at a constant 90° angle ■The recommended product configuration allows drawing of load-time graphs and automatic calculation of average peeling force in the selected range * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Drilling Machine for Wide Workpieces(Standard Type)'ABP-1015GIII'

Continuous operation from prepared hole drilling to tapping with one set of product data. The NC unit is optimized specifically for drilling machines. smooth, interactive inputting. In addition to the 1000 x 1500 mm "ABP-1015GIII" (Standard 1 sheet), we also offer 1500 x 3000 mm "ABP-1530GIII" and 1500 x 4000 mm "ABP-1540GIII". 【Features】 ●15.6-inch touch panel LCD display. Operability is improved further. ●ATC device and tool automatic measuring function are equipped as standard. ●Work height measuring device (Optional) ●USB port is provided as standard on the external interface. ●In addition to the standard table size, customization is possible(Consultation necessary) ※For details, please refer to the PDF document or feel free to contact us.

Target industry: Other Manufacturing Industrial Machinery/Devices

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Coefficient of friction fixture "COF series"

The COF Series is a fixture to calculate both static and kinetic friction of coefficient in just one measurement. Can perform measurement of friction of coefficient on paper and film, drawing and printing graphs using the software included. When used with dedicated force gauge and test stand, you can perform tests partially compliant with JIS P 8147(1994), “Paper and Board - Determination of the Static and Kinetic Coefficients of Friction”, JIS K 7125 (1999) “Plastics - Film and sheeting - Determination of the coefficients of friction” and ISO 8295(1995). [Features] -Easy calculation of static and kinetic friction coefficients in just a single test with included software 　Able to draw and print graphs -Available in both vertical and horizontal test stands, based on the size of customer’s workspace * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Film chuck “FC Series”

The “FC Series” is a film chuck whose grip materials and clamping methods are changeable according to the sample to be tested. When used with dedicated force gauge, test stand and connecting cable, you can perform tests partially compliant with JIS Z1711 (1994) “Polyethylene film bags, 8.4 heat seal strength test” and other wide-ranging tests. [Features] -Ideal for tensile strength tests, gripping thin samples such as films ・Apart from films, can be used for the measurement of thin samples such as adhesive tapes and magnetic cards -Wide line-up of models ・Lightweight model "FC-21": light weight, suitable for gauges of lower load values ・Standard model “FC-20/40”: up to 500N ・Single-side urethane type “FC-21U/41U”: prevents slipping and tearing of ultra-thin samples ・Lever model "FC-21UQ": single-side urethane type, can be set up in just one operation -Custom manufacturing for different widths, thicknesses and usages is also available upon request. * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

[Long stroke model] Vertical manual test stand “HV Series”

The HV Series is a vertical manual test stand for both tension and compression measurement. Wheel-operated handle guarantees reliable measurement. This series can be used for full-scale measurement at affordable prices. [Features] ■Screw feed method enables precise adjustment for stable thrust ■Designed to pair with various Imada force gauges ■Compact and lightweight simple tester at affordable prices ■When used with optional measuring instrument, travel distance can be measured simultaneously * For details, please download our PDF documents or feel free to contact us.

Target industry: Measurement/Analytical Instruments

IMADA CO.,LTD.

• View details
• Catalogue

Multi-Channel Digital Ultrasonic Flaw detector ULTECT21

Target industry: Measurement/Analytical Instruments

KJTD Co., Ltd.

• View details
• Catalogue

Desktop Ultrasonic Imaging System D-view

Target industry: Measurement/Analytical Instruments

KJTD Co., Ltd.

• View details
• Catalogue

Portable Phased Array Ultrasonic Inspection Instrument PA4

Target industry: Measurement/Analytical Instruments

KJTD Co., Ltd.

• View details
• Catalogue

High Speed & Wide Band Ultrasonic Flaw Detector HIS3

Target industry: Measurement/Analytical Instruments

KJTD Co., Ltd.

• View details
• Catalogue

VCC-5CXP3M (Monochrome) / VCC-5CXP3R (Color) / VCC-5CXP3NIR (Near-infrared)

Max. 85fps high speed (at CXP6・8bit/CXP6・10bit), 5.3M resolution, 29x29x55mm small footprint CoaXPress camera utilizing CMOS image sensor. The camera features versatile functions such as external trigger, long distance transmission, ROI, sub-sampling, defective pixels correction, sequence control, shading correction, PoCXP, etc. to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. This model “VCC-5CXP3” can also be used for “Multi-camera System”, which enables to connect Max. 40pcs of cameras and synchronize them by only 1 PC. For example, when 5pcs of CoaXPress frame grabber board (8ch) is installed in 1 PC, Max. 40pcs of camera (at 1 lane) or any preferred combination of CoaXPress camera can be connected and synchronized according to the customer’s application. ※For further information on VCC-5CXP3 or Multi-camera system, please contact our Sales division.

Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices

CIS Corporation

• View details
• Catalogue

Standard general-purpose 1-axis drilling machine 'ABP-516SJIII'

'ABP -516 SJIII' is a standard type general-purpose 1-axis NC drill machine that combines versatility and high rigidity. Equipped with an air blow device on the spindle head. It blows off the chips at the drilled hole. Stable spindle drive achieved with a high-power motor and high-precision inverter. In addition to the 500 x 1600 mm "ABP-516 SJIII" (Standard 1 sheet), we also offer 620 x 1600 mm "ABP-616SJIII" and 500 x 3600 mm "ABP-536SJIII". Features ■User-friendly NC unit ■Tool automatic measuring function ■Air blow device as standard ■Stable spindle operation ■CAD data convertible to programs for the machine(optional) ※For details, please refer to the PDF document or feel free to contact us.

Target industry: Industrial Machinery/Devices

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Multi-function 1-axis drilling machine 'ABP-516SIII'

ABP -516SIII' is a multi-function 1-axis drill machine that can be operated continuously from drilling to tapping with one set of product data. Equipped with an ATC(automatic tool changer), Tool changes are performed automatically when a tool life expires during automatic operation, minimizing machine stoppage time. Tool life management function is also featured. Features ●Continuous operation from prepared hole drilling to tapping with one set of product data. ●15.6-inch touch panel LCD display. Operability is improved further. ●The NC unit is optimized specifically for drilling machines. Smooth,interactive inputting. ●In addition to the standard table size, customization is possible.(Consultation necessary) ※For details, please refer to the PDF document or feel free to contact us.

Target industry: Industrial Machinery/Devices

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

VCC-2CXP2M (B/W)

The enclosure of VCC-2CXP2M is 29mm cubic size small footprint, and its compact size is suitable for embedded applications such as robot vision, drone installation, and machine vision. Also, it can transfer images at 85fps at CXP-3 (8bit/10bit) output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as external trigger, long distance transmission, ROI, sub-sampling, defective pixels correction, shading correction, PoCXP, etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. For further information, please contact our sales division.

Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices

CIS Corporation

• View details
• Catalogue

VCC-GC10V31L (B/W)

22mm cubic in size, ultra light-weight and small PoCL-Lite interfaced B/W camera. Only 0.65W consumed for power consumption so that it is easy to use for temperature concerned embedded systems like semiconductor related equipment. Power can be supplied via 14pins thin cable and total system cost can be reduced. Best suited for size and weight-conscious systems currently using remote head cameras and others.

Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Automotive/Transport Machinery

CIS Corporation

• View details
• Catalogue

VCC-12CXP4M (B/W) / VCC-12CXP4R (Color)

Max. 65fps high speed (at CXP6・8bit/10bit x2lanes), 12M high resolution, 55x55x30mm small footprint CoaXPress camera is added to the lineups of CIS CoaXPress camera. The camera utilizes SONY Pregius image sensor which features versatile functions perfectly suitable for FA application such as global shutter, less noise, less temperature increase, 4.3W low power consumption, etc. Further more, the functions such as external trigger, ROI, 2x2 binning, defective pixels correction, shading correction, etc. are installed to the camera to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. This model “VCC-12CXP4” can also be used for “Multi-camera System”, which enables to connect Max. 40pcs of cameras and synchronize them by only 1 PC. For example, when 5pcs of CoaXPress frame grabber board (8ch) is installed in 1 PC, Max. 40pcs of camera (at 1 lane) or any preferred combination of CoaXPress camera can be connected and synchronized according to the customer’s application. ※For further information on VCC-12CXP4 or Multi-camera system, please contact our Sales division.

Target industry: Semiconductors/LCD/FPD Industrial Machinery/Devices Optical Equipment/Parts

CIS Corporation

• View details
• Catalogue

VCC-25CXPHSM (B/W) / VCC-25CXPHSR (Color)

Max. 150fps high speed, 25M high resolution, 65x65x93.3mm small footprint CoaXPress camera. Packed with versatile functions such as ROI, shading correction, external trigger, gamma correction etc. 【Features】 ◆25M pixels・Global shutter・CMOS sensor ◆65×65×93.3mm small footprint ◆CoaXPress　CXP2.0 CXP-12、CXP-6 complied ◆Video output: HD-BNC terminal ◆Max. 150fps (at CXP-12・8bit) high speed ◆Versatile functions suitable not only for FA application, but also for the application which requires long distance transmission such as measurement, robot vision, drone, and research/observation. Ex.) Shading correction/Gamma correction/Defect pixel correction by user/External trigger/Vertical and horizontal flip/ROI/Black level adjustment/Test pattern output etc…

Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices

CIS Corporation

• View details
• Catalogue

Plate Drilling Machine(Standard Size) “ABP-1015G”

“ABP-1015G” is a drilling machine which is suitable for the wide plate used for the parts of bridge and steel construction. We've increased the drilling torque so that the large diameter hole is drilled smoothly. Windows OS and 12.1 inch screen panel facilitate visibility and operability We have three products in accordance with the size of workpiece. ABP-1015G for 1000x1500mm workpiece, ABP-1530G for 1500x3000mm workpiece and ABP-1540G for 1500x4000mm workpiece. [Features] ■12.1 inch display on the control panel enhances operability ■Featured as standard ATC(Automatic Tool Changer)and automation tool length measurement system. ■From drilling to tapping by just one coordinate in the program ■Work Height Measurement Device(Optional Accessory) ■Equipped USB Port as External Interface ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

3 Axes Drilling and Circular Saw Cutting Combination Machine “CBF-3015II”

"CBF-3015II" is a 3-axis drilling machine and circular saw cutting combination machine compatible with carbide tipped and HSS saw, cutting speed becomes twice faster. A new type of mission is adopted to ensure smooth machining. Automation sizing, Automatic gripper retraction and larger display monitor contribute reducing total machining time. [Features] ■High speed and high precision circular saw machining ■Both Carbide tipped saw and HSS saw compatible. ■Machining a wide range of shaped-steel materials ■The clean-mist semi-dry cutting system reduces wetting of workpiece ■Prolonged service life of circular saw blade ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Circular Saw Machine with Carbide Tipped Saw and HSS Saw “CHL-2515AII”

“CHL-2515AII” is a circular saw machine. The cutting section adopts a lateral slide(from lower side face)&down cut mechanism, which can reduce influences of chips in cutting a hollow section. We have upgraded the structure of the mission gear and the driving system of the circular saw, which contributes to the reduction of the backlash and the improvement of the machining speed. This machine is capable of machining the hollow section(Thickness 12mm) with high precision. [Features] ■Both Carbide Tipped Saw and HSS Saw compatible ■Machining a wide range of steels ■Semi-dry cutting system significantly reduces wetting of workpiece ■High-speed and High-precision machining ■Simple and easy operation ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Multi-Purpose Hydraulic Press Machine “Unit Worker Series UWD-45IIS”

“Unit Worker Series UWD-45IIS” is truly multi-purpose, which executes cutting, punching and notching with high precision and high speed for angle bar, channel steel, C-shaped steel and flat bar. A variety of machining with TAKEDA's Unit Die. [Unit Worker Series] 1.[UWD-45IIS], compact body enables a smooth layout at the factory and the pressure tonnage is 450kN as a standard pressure force. 2.[UWD-70IIS], machining stainless steel with the pressure tonnage of 700kN. [Features] ■Multi-Function ■Precise machining ■Safety and easy Operation ■Flexibility ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Drilling Machine for Shaped Steel “3BA-700IV”

“3BA-700IV” is an automatic drilling machine with 3-axis for shaped steel Just enter the drill data, no need to adjust each dog for measuring the stroke. By detecting and correcting the inclination on the web and error on the flange, no extra correction at the assembly site is required. [Features] ■Three selectable origin point of Left, Right and Center enables quick symmetric machining ■Interactive CNC input for novice to expert ■Laser pointing for the symmetric machining with material locked. ※ Please kindly refer to the catalog or feel free to contact us for more details. (The previous model,“3BA-700C”catalog is available.)

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Automatic Drilling Machine for H Beam “3BF-1050III”

“3BF-1050III” is an automatic drilling machine for H Beam, Work material sizes are from 150mm x 75mm to 1,000mm x 500mm. Double Grip Method is used as a gripper for precise feeding and positioning the material.(Japan Patent No. 2050597/2087609) Two feeding grips, which absorb the warp and bend of the material, are equipped on the machine. [Features] ■Compact designed and Minimized foot print ■The clean mist cooling system reduces wetting of the work materials ■Automatic laser detector finds the edge of the material on loading ■Loadable short materials such as joint parts ■Easy operation with an interactive CNC ※ Please kindly refer to the catalog or feel free to contact us for more details. (The previous model,“3BF-1050C”catalog is available.)

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

3-Axis Drilling and Circular Saw Cutting(Carbide Tipped Saw) Combination Machine “CBF-4020W”

“CBF-4020W” is a 3-axis drilling and circular saw cutting combination machine with a carbide tipped saw, which realizes a fully automatic machining, precise feeding, drilling and circular saw cutting of H beam(Width 400mm), square hollow(200mm) and angle bar with high speed. Total machining time is reduced by automatic sizing, automatic gripper retraction. [Features] ■High speed and high precision circular saw machining ■Machining a wide range of shaped-steel materials ■The clean-mist semi-dry cutting system reduces wetting of workpiece ■Prolonged service life of circular saw blade ■Simultaneous drilling with 3-axis (Marking also capable) ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Circular Saw Machine for Flat Plate “CHT-4008A”

“CHT-4008A” is a circular saw machine with a carbide tipped saw for the flat plate. High precision and high-speed cutting are achieved, which dramatically improves the productivity of cutting the flat plate materials. Automatic sizing gripper feeds and positions the material(Tolerance 0.1mm). Precise and high-speed cutting generate virtually no burr and eliminate the bend and oblique result. [Features] ■High-speed, high precision cutting ■Changing circular saw is quick and easy ■Simple input and easy operation ■Optimizes cutting condition depending on the material steel grade. ■The clean-mist semi-dry cutting system reduces wetting of workpiece ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Automatic burr remover works on both sides of plate"PS-650W"

"PS-650W"automatically grinds the drilled burr on both sides of splice plate. Rubber pads are used as pressure pads, Wide grinding belts work only on the burrs and don't affect the marking on the plate. Upper and lower grinding belt are at the same position, which can grind the burrs on both sides of the plate at the same time and double the productivity. Tracking device, which automatically corrects the inclination of the belt, preventing damaging on the belt. [Features] ■Set the thickness of the plate by just pressing the button switch then operate ■Wide grinding belts automatically work on the burr on both side of the plate ■Faster grinding speed improves productivity ■Special made rubber pad ensures precise finish ■Dust collector keeps the working environment clean ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Hydraulic Press Machine with Edge Notching for Sheet Metal “TCN-256B”

"TCN-256B" is a hydraulic press machine with Edge notching, which has an independent scale of 45, 90 and 135 degrees on the left and right. The divisions on the scale have vernier scales, ensure the material to be precisely notched. Mounts TAKEDA's Unit Die Molds and it's capable of various machining by changing die molds. One-touch change of the die molds achieves superb availability. [Features] ■ Capable of corner shear up to 6mm thick 250x250 mm (SS400) ■ Dial rotation facilitates adjusting the clearance at the corner shear side. ■ Quick stroke adjustment by screws ■ Notching unit is replaceable ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Hydraulic Press Machine “UP-30B”

"UP-30B" is a hydraulic press machine that is made for TAKEDA's Unit Die. Just put the alignment pin on TAKEDA's Unit Die(PRESET SERIES) into the pin hole on the table, and tighten the fixing bolt and ready to go. Mount a variety of TAKEDA's unit die open height is up to 400mm, by changing the punch head. To change the open height and shut height quickly by adjusting lever on the front face of the machine body, to fit the size of die. [Features] ■Designed to mount variety of TAKEDA's Unit Die(PRESET SERIES) ■Hydraulic Motor: Low Noise Type ■One-Touch open height and shut height adjustment ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Steel Surface Treatment Machine “Shot Blasting Machine Series”

『Shot Blasting Machine SBF-450』 is a steel surface treatment machine for the plate(One face only), which automatically clean the surface of the splice plate and gusset plate. The design of the machine is compact and it's possible to install this machine in a corner of the factory. 『Shot Blasting Machine Series』 also have [SBF-510], a surface treatment machine for both sides of the plate, and [SBH-950E], s surface treatment machine for H beam. [Features of SBF-450] ■ Foundation work isn't required ■ Steel grit can completely be recycled ■ Dust collector enhances the working environment ■ Easy to change the impeller blade ■ An impeller is connected directly to the motor ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

High Speed Circular Saw Machine for Pipe/Hollow “CSHP-75A/100A/150A”

『CSHP-75A/100A/150A』 is a high-speed circular saw machine for the hollow section, which can shorten the cycle time for cutting the hollow section with the latest technology optimized for the high-precision cutting. By combining with an optional automatic loader, a deburring device, etc., to be incorporated into a product line. [Features] ■The single vise mechanism achieves faster moving speed ■High-rigid frame ■The circular saw slides obliquely ■Ecological Clean-mist method cooling system ■Reduction of oil adhesion results in easier maintenance and easier workpiece handling in following process ■AC servomotor control and ball screw for precise feeding and positioning. ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

"PRESET SERIES" Unit Die for Press Machine

"Unit die"PRESET SERIES" for Press machine comprehensive catalog" is a general catalog of Takeda Machinery Co., Ltd., which develops, manufactures and sells metal working machines (Shaped steel drilling, circular saw machines and Punching die) Contents are "Punch series" die for applications such as flat plate processing, thick plate processing, small parts proximity punching holes etc., and "Shaped-steel processing series" such as for angle cut, flat bar cut, V notch etc. [Contents] ■ Punch series ■ Shape steel processing series ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

High precision cutting at free angle “CM-1010KKS”

Cutting angle freely set on swivel table (within +-60 degrees range) Automatic deceleration at the start of cutting and at the end of cutting realizes a long service life of the saw blade Cutting of angle steel, channel steel as well as square pipes is also capable Combined with autoloader, Capable of corresponding to mass production machining Easy operation just by inputting angle and dimension with the touch panel [Features] ■ High precision cutting at free angle ■ Even Trapezoidal shaped product can be cut without changing the setup ■ Secure a safe and clean work environment by adopting full cover ※ Please kindly refer to the catalog or feel free to contact us for more details.

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Changes Four tools automatically 「CBF-3015Ⅱ-ATC」

1.The ATC device reduces tool change setup time. 2.The automatic sizing device performs processing positioning,reducing machining time needed. 3.The gripper for feeding material features an automatic retraction function. 【Features】 ・Equipped Automatic tool changer. ・Enable stable machining by adopting servo motor and ball screw for the feed axis. ・Compatible with carbide-tipped blades and high-speed steel blades ・Delivers more efficiency with optional Loader and Unloader. ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Automotive Parts

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Dramatically reduced machining time「UWF-150Ⅲ」

【Features】 ・Punching with two different diameters in a single process.(With Punch part expansion option) ・Intuitive large 12.1 inch touch screen. ・Changing unit-type dies is easy and rapid. ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Other Manufacturing

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Drilling Machine for Shaped Steel with Automatic Measurement『3BF-1050III-RG』

Programming, Centering and Drill Speed Setting are Automatic! Increased efficiency with fully automatic functions! This is a drilling machine for shaped steel with automatic measurement that will drill holes in H-Beam in sizes (width × height) from 150 mm × 75 mm to 1,000 mm × 500 mm, square pipes of up to 500 mm sq., channel steel of up to 380 mm, and angle bar of up to 250 mm.

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

QCM TRIAL KIT

The “QCM TRIAL KIT” that can detect and measure trace amount of mass yet produced with lowered cost is now for sale. A product that integrates together sensor element, frequency counter and device software, designed to operate with just a computer. By rendering the compact and portable “QCM TRIAL KIT” the ability to utilise 3 sensor elements simultaneously and calculate the average measured result, the device evolves into “TQCM”. ※Please follow the links below for further information and feel free to inquire

Target industry: Measurement/Analytical Instruments

PIEZO PARTS CO., Ltd.

• View details
• Catalogue

Eco Fleece

"ECO FLEECE is a wallpaper made from fleece (non-woven fabric) and pulp, and it is painted with water- based paint process in the factory. Since it is plasticizer-free, it is extremely safe, and it is also excellent for installations. Also, It does not gather dust because it is not a conductor that attracts static."

Target industry: Construction Trading/Distribution

Nagai.Co.,ltd.

• View details
• Catalogue

VCC-2CXP6M (B/W) / VCC-2CXP6R (Color)

The enclosure of VCC-2CXP6 is 29x29x55mm small footprint, and its compact size is suitable for embedded applications such as robot vision, drone installation, and machine vision. Also, it can transfer images at 239fps at CXP-6 (8bit) output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as external trigger, ROI (vertical direction only), 2x2 binning (B/W model), defective pixel correction, white balance, etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. For further information, please contact our sales division.

Target industry: Semiconductors/LCD/FPD Industrial Machinery/Devices Measurement/Analytical Instruments

CIS Corporation

• View details
• Catalogue

VCC-SXCXP3ML (SXGA resolution, B/W camera featuring LED controller)

The enclosure of VCC-SXCXP3ML is 29 x 29 x 55mm footprint, and its compact size is suitable for embedded applications such as machine vision. With LED controller embedded, LED lighting can be directly connected to the camera and they can be powered and controlled via single BNC cable. Since this model enables to operate with less equipment, it contributes to space and cost efficiency. The camera is designed for CCS LED lightings. Also, it can transfer images at 168fps at CXP-3 output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as external trigger, ROI, sub-sampling, defective pixel correction, sequence control, shading correction, GenICam complied. etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. For further information, please contact our sales division.

Target industry: Semiconductors/LCD/FPD Optical Equipment/Parts Industrial Machinery/Devices

CIS Corporation

• View details
• Catalogue

VCC-SXCXP3M (B/W) / VCC-SXCXP3R (Color) / VCC-SXCXP3NIR (Near-infrared model)

The enclosure of VCC-SXCXP3 is 29mm cubic footprint, and its compact size is suitable for embedded applications such as robot vision, drone installation, and machine vision. Also, it can transfer images at 168fps at CXP-3 output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as external trigger, ROI, sub-sampling, defective pixel correction, sequence control, shading correction, etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. NIR (Near-infrared) model “VCC-SXCXP3NIR” is also available. With this model, images can be captured even if the target is at out of visual light range that cannot be inspected with human eyes or normal camera (ex. a candy in the opaque package). For further information, please contact our sales division.

Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices

CIS Corporation

• View details
• Catalogue

Bioethanol purification facility

HDS™ was adopted in Japanese largest bioethanol plant. It has a proven record to be operated about six years without any trouble and replacement. [Future of Zeolite membranes(Ceramic tube)] ■Its structure is made of only ceramics including fitting parts. ■It is a simple tubular structure. ■It has high durability and reliability. ■It can be used in harsh environments such as high temperature and high pressure.

Target industry: Medical Supplies/Biotechnology Chemical Materials/Products Paper Making/Paper Products

Hitachi Zosen Corporation

• View details