- English
- 日本語
Industrial machine
Industrial machine |
|
|---|
-
Semi-automatic Duplex Turret Slitter Rewinder “SDT-926-1300”
- Catalogue
This Slitter Rewinder is designed to treat various plastic films which require fine finished with easy handling. Thanks to duplex turret system, you will obtain high production rates. 【Main specifications】 Unwinding dia. : φ1000mm Rewinding dia. : φ600mm Mechanical speed : 600m/min. Slitting width : Min.90mm (50mm as an option) Trimming winder : 2units Internal type
Target industry: Resin/Plastic/Rubber Products Printing/Photoengraving/Binding Paper Making/Paper Products
-
Single Side Inspection Rewinder “Model:RSF-308VI-1300”
- Catalogue
This rewinder automatically performs product inspection of stock, which has been printed on one side, by the defect detection equipment. When a defect is detected, the machine reduces its speed until it stops rewinding, then the film is automatically rewound back and the defect area stops over an inspection plate for visual examination. The operator confirms the defect by visual examination, and carries out the operation to remove the defective part.
Target industry: Paper Making/Paper Products Resin/Plastic/Rubber Products Printing/Photoengraving/Binding
-
Duplex Center Drive Slitter Rewinder “Model:HDF-406-1300”
- Catalogue
This slitter rewinder are designed to treat various plastic films which require fine finished with easy handling. It includes the product receiver to simplify the conveyance of the wound product. 【Main specifications】 Unwinding dia. : φ800mm Rewinding dia. : φ600mm Mechanical speed : 400m/min. Slitting width : Min.80mm (50mm as an option) Trimming winder : By blower
Target industry: Optical Equipment/Parts Paper Making/Paper Products Resin/Plastic/Rubber Products
-
Duplex Center Drive Slitter Rewinder “Model:HDF-306V-1300”
- Catalogue
This slitter rewinder are designed to treat various plastic films which require fine finished with easy handling. It includes the product receiver to simplify the conveyance of the wound product. 【Main specifications】 Unwinding dia. : φ1000mm Rewinding dia. : φ600mm Mechanical speed : 400m/min. Slitting width : Min.90mm (50mm as an option) Trimming winder : Internal type (2units)
Target industry: Optical Equipment/Parts Paper Making/Paper Products Resin/Plastic/Rubber Products
-
HAGIHARA INDUSTRIES INC. “Product Catalogue”
- Catalogue
Product Catalogue of HAGIHARA INDUSTRIES INC. the leading manufacturer of Slitter Rewinder in JAPAN.
Target industry: Optical Equipment/Parts Paper Making/Paper Products Resin/Plastic/Rubber Products
-
Trimming Winder “Model : TW-11”
- Catalogue
This Trimming winder winds the trimmed edge from the slitter machine. 【Main specifications】 Web width : 10-30mm Winding dia. : φ400mm Traverse width : 400mm Mechanical speed : 400m/min.
Target industry: Optical Equipment/Parts Paper Making/Paper Products Resin/Plastic/Rubber Products
-
Corrective Rewinder “Model : RSF-105V-600”
- Catalogue
This rewinder performs rewinding film rolls for correcting edge, correcting printed order and so on. The operator confirms the defect by visual examination, and carries out the operation to remove the defective part. 【Main specifications】 Unwinding dia. : φ500mm Rewinding dia. : φ500mm Mechanical speed : 300m/min.
Target industry: Optical Equipment/Parts Printing/Photoengraving/Binding Resin/Plastic/Rubber Products
-
Single Side Inspection Rewinder “Model:RSF-108VI-1300”
- Catalogue
This rewinder automatically performs product inspection of stock, which has been printed on one side, by the defect detection equipment. When a defect is detected, the machine reduces its speed until it stops rewinding, then the film is automatically rewound back and the defect area stops over an inspection plate for visual examination. The operator confirms the defect by visual examination, and carries out the operation to remove the defective part.
Target industry: Optical Equipment/Parts Resin/Plastic/Rubber Products Printing/Photoengraving/Binding
-
Duplex Center Drive Slitter Rewinder “Model:HDF-105-1300”
- Catalogue
This slitter rewinder are designed to treat various plastic films which require fine finished with easy handling. 【Main specifications】 Unwinding dia. : φ800mm Rewinding dia. : φ500mm Mechanical speed : 300m/min. Slitting width : Min.80mm (50mm as an option) Trimming：By blower
Target industry: Optical Equipment/Parts Resin/Plastic/Rubber Products Paper Making/Paper Products
-
Duplex Center Drive Slitter Rewinder “Model:HDF-306Y-1300”
- Catalogue
This slitter rewinder are designed to treat various plastic films which require fine finished with easy handling. It includes the product receiver to simplify the conveyance of the wound product. 【Main specifications】 Unwinding dia. : φ1000mm Rewinding dia. : φ600mm Mechanical speed : 400m/min. Slitting width : Min.90mm (50mm as an option) Trimming winder : Internal type
Target industry: Optical Equipment/Parts Resin/Plastic/Rubber Products Paper Making/Paper Products
-
"TOP" Series Horizontal Drills
- Catalogue
Conventional horizontal drilling methods are apt to encounter the difficulties such as collapse, water gush and hole deflection, etc. Duplex pipe shield drilling method with "TOP" series horizontal drilling machine ensures trouble-free and effective operation through troublesome ground formations such as boulder layer, fault or fractured zones.
Target industry: Construction/Mining Machinery Other Construction
-
"TMW" Multi-Auger Type Diaphragm Walling Machine
Multi-auger type diaphragm walling machine is the equipment to form a rectangular soil-mixing column wall by mixing and kneading the soil and cement slurry as excavating with multi-auger bits. Side wall cutter can remove uncut section remained by auger bit excavation and construct a continuous rectangular wall with flat surface.
Target industry: Construction/Mining Machinery Construction Other
-
DTH Hammer
- Catalogue
・Under-reaming bit (SUPER JAWS): This method is DTH hammer drilling system by protecting bored hole by outer casings when drilling the ground formation easy to collapse. After drilling, well casings and screens can be safely and securely installed through the inside of outer casings which are left inside bored hole. ・Reverse circulation hammer (MACH drill): Drilling is carried out by DTH method and removal of cuttings are carried out by reverse circulation system effectively. Especially, this method is suitable for drilling works on the sea or on the river for foundation piling for bridge and jetty, etc.
Target industry: Construction/Mining Machinery Construction Other
-
"TSL" Geothermal Exploration and Production Drill
- Catalogue
"TSL" drill is suitable for the recent requirement of hot spring exploration and deep underground energy exploration, and has a structure with the combination of wireline coring system and rotary table non-core drilling system with kelley bar.
Target industry: Construction/Mining Machinery Construction Other
-
"TOP" Series Truck mounted Water Well Drill Rigs
- Catalogue
In some dry areas such as the countries in Africa, Middle East, Asia and South America, the supply of potable and irrigation water still mainly depends on surface water, which is apt to dry up during dry season. Meanwhile, ground water can stably supply the water through the year disregarding the season. As the demand of groundwater development in the above areas quite enhances, the operation of our water well drill rig with high mobility is very active. Our truck mounted drill rigs with supply records more than 200 units to those countries have been evaluated with a reputation of its better operability and high durability.
Target industry: Construction/Mining Machinery Construction Other
-
SONIC Drill, SUPERPROBE
- Catalogue
SONIC drill has an innovative drilling technology providing the rotation and vibration with drill bit. Compared with conventional rotary method, DTH hammer method or rotary percussion method, remarkable high speed drilling is realized.
Target industry: Construction/Mining Machinery Construction Other
-
"EP" & "SP" Series Environmental Investigation Drills
- Catalogue
"EP" & "SP" series drills have innovative drilling system giving the roation and vibration to drill bit simultaneously and offer remarkable drilling efficiency compared with hydraulic percussion drill in consideration of neighboring environment thanks to its low noise creation. These drills are capable of high speed sampling to collect undisturbed samples without the use of circulation fluid, furthermore, can conduct the sampling and drilling of monitoring well at same time by means of dual tube method.
Target industry: Construction/Mining Machinery Construction Other
-
Cast-in-Place Piling Machines
- Catalogue
To construct surface structures, the foundation structure by installing the piles into the ground is provided to support surface structures. Cast-in-place pile construction is the method to complete the pile by placing the concrete after installing the reinforced cage to be arranged on site into bored hole. Cast-in-place pile constrution has various methods based on drilling depth, pile diameter, pile length, etc.
Target industry: Construction/Mining Machinery Construction Other
-
Rotary Multi-Horizontal Cutter Diaphragm Wall Trencher
- Catalogue
Diaphragm wall trenching is a technology to construct a continuous underground wall for the purpose of the foundation and retaining wall before construction of large scale underground structures. The performacne and capability of rotary multi-horizontal cutter diaphragm wall trencher is expected for future large scale projects such as the construction of underground railway and highway. In developing countries such as China, the demand of this diaphragm wall trencher to be replaced with bucket type trencher which is used only for shallow trenching is enhanced.
Target industry: Construction/Mining Machinery Other Construction
-
Sheet Piler for hydraulic hammer HP series
- Catalogue
- Distributor required
NPK’s sheet piler HP series, used with hydraulic hammers, is suitable for lifting/driving sheet piles in urban areas or narrow, unstable spaces. It’s also cost effective as no crane or power generators are required. The chuck bends 90° (SX model only) and can pick up sheet piles without standing them upright first, thus reducing operation time. We have the following 4 models with recommended shovel weights of: HP-2SX: 6 – 9 tons HP-4SX: 10 – 16 tons HP-7SX: 17 – 21 tons HP-10L: 22 – 30 tons (Special order)
Target industry: Construction Construction/Mining Machinery
-
New compact hydraulic hammer PH series
- Catalogue
- Distributor required
NPK, a pioneer in hydraulic hammers, has developed compact hydraulic hammers for the next generation. While maintaining a high crushing force, which is NPK’s watchword, innovative but simple design featuring a carburized coating integrated cylinder ensures light weight and great durability. Offering easy maintenance and great usability for operators or repair work, it’s the industry’s only gas powered model. Shortened operation time is guaranteed thanks to its world-class crushing force. We have the following 4 models with recommended shovel weight of: PH-1: 2.0 - 3.5 tons PH-2: 3.0 - 5.5 tons PH-3: 4.0 - 8.0 tons PH-4: 6.0 - 9.0 tons
Target industry: Construction Construction/Mining Machinery Mining
-
Hydraulic Hammer for medium/heavy duty GHS series
- Catalogue
- Distributor required
NPK’s hydraulic hammer GH series has gained an outstanding reputation and continued customer support for its advanced technology. It’s the industry’s only “Gas powered method” to ensure powerful operation. Rubber cushioning comes standard for better shock- and soundproofing and it utilizes a very durable cylinder. Can be attached to 10 – 20 ton class hydraulic hammers. We offer a wide variety of products to meet any and all customer requirements.
Target industry: Construction Construction/Mining Machinery Mining