The small-scale oil flowmeter is a volumetric flowmeter employing a gear-type rotor specifically designed for oil and which can be used for a wide range of measurements, for example in measuring engine oil or fuel oil for marine vessels and boilers. Furthermore, flowmeters specifically designed for measuring high-temperature fuel like ship fuel are available. ■Electronic Counting Unit Digital Display Totalizing counter, reset counter and momentary flow rate are alternatively displayed. Furthermore, it is possible to set the momentary flow rate at 1 hour or 1 minute intervals. Multifunctional Counting Unit Ramified Flow Rate Display, Forward/Reverse Detection, Self-diagnosis,Battery Consumption Alarm etc.
The emergency shutoff valve (MBA series), thanks to using a carbon dioxide cartridge that generates a large initial torque on the driving source and employing a ball valve, is perfectly suited as safety and disaster prevention equipment for shutting off various types of pipelines in case of emergencies. ○Operated by Reliable Carbon Dioxide Cartridge ○No Auxiliary Equipment Required ○Either horizontal or vertical piping is available. ○Opening/closing can be performed manually a handle. ○Over 20,000 Units sold in Japan and Overseas
The gas meter is a volumetric flowmeter for gases which directly measures the flow rate by using two sets of rotors. Since the two sets of rotors rotate without making contact, it is hardly subject to accuracy due to equipment deterioration and can measure with high precision and over a wide flow volume range. Furthermore, the counting unit is equipped with an electronic temperature/pressure compensator (ETPC), which calculates the temperature and pressure inside the tubes detected by each sensor and displays totalized flow rate of the gas converted into the reference state. ○High Accuracy and Wide Measurement Range ○Wide Pressure Range and Less Pressure Loss ○Low Sensitivity Flow Rate ○Built-in Automatic Fueling Function
The turbine gas meter, more compact and light than positive displacement gas meters, is a highly accurate gas meter which was designed for city gas measurements and is capable of measuring large volumes of gas. Furthermore, the counting unit is equipped with an electronic temperature/pressure compensator (ETPC), which calculates the temperature and pressure inside the tubes detected by each sensor and displays totalized flow rate of the gas converted into the reference state. ○High Accuracy and Wide Measurement Range ○Easy Maintenance and Inspections ○Enhanced Urability ○Compact Design
The ultrasonic gas meter adopts a method based on measuring the difference in propagation time by alternately repeating transmission and reception with a pair of ultrasonic sensors as the time difference of ultrasonic waves varies with flow velocity; this allows for extreme accuracy of measurement and a wide range of flow rate. ○High Accuracy and Wide Range of Flow Rate （±1% RD, Flow Rate Range1: 40） ○Responds Quickly to Flow Rate Change ○No Moving Parts ○Explosion-proof Design ○Self-diagnostic Function ○Communication Function
Since the parts in contact with liquid are integrally molded in PFA resin with excellent corrosion resistance and there are no sealed parts or pocket parts other than the piping connecting parts, PFA series are ideal for measuring chemical fluids, corrosive fluids, ultrapure water and similar fluids. ●Connection Size: 3/8, 1/2, 3/4, 1B ●Applicable Fluid: Chemical Fluids, Corrosive Fluids, Ultrapure Water etc. ●Accuracy: ±3％FS, ±3％RD ●Flow Rate Range: 0.3 ~150L/min ●Fluid Temperature: 0 ~ 100℃ ●Fluid Pressure: 0.5 ~ 1.0MPa
The vertical-type non-fluctuation flowmeter is a volumetric flowmeter that directly measures the flow rate using two sets of 45º combination rotors. ○Low Vibration and Low Noise ○High Precision and Wide Range of Flow Rate ○Easy to Maintain ○Less Pressure Loss ○Enhanced Shaft Bearing’s Durability ‐‐ ●Connection Size: 6~12B ●Applicable Fluid：Crude oil, Petroleum Derivatives etc. ●Accuracy：± 0.5%RD or ± 0.2%RD ●Flow Rate Range : 8~1,500m3/h ●Fluid Viscosity：150 mPa·s or less ●Fluid Temperature：0~150℃ ●Maximum Working Pressure：2.45MPa ●Materials：Main Body SCPH2 Rotor AC7A or FC200 ●Available with Intelligent Counting Unit
The turbine meter is smaller and lighter than other flowmeters and it allows highly accurate measurement over a wide flow rate range. It is an iconic turbine meter that is adopted for a wide range of uses including the trading process control and process management in various field. 〇Being made of stainless steel, it has excellent corrosion resistance and it can be used with a wide range of liquids, including water, petroleum and chemical fluids. 〇Since the housing has a cylindrical shape which is highly resistant to pressure, it can also be used for measuring high pressure fluids. (Up to 343 MPa.) 〇Its compact structure ensures ease of use and maintenance. Specifications of Intelligent Indicator Unit Display: Integrated, Reset, Momentary Flow Rate, Temperature etc. Functions: Linearization, Temperature Correction, Coefficient Correction, Correction of Measuring Chamber’s Thermal Expansion etc. Output: Open Drain, Voltage Pulse, Current Pulse, Analog Output etc. Communication: Smart Communication Explosion-proof Design: Explosion-proof Structure(ExdⅡBT4)
The pulse sensor CCG flowmeter is a volumetric flowmeter for measurements of microscopic quantities of various fluids like catalysts, additives, and perfumes. Being made of stainless steel, it also ensures superior corrosion resistance against special fluids. Intelligent counting unit is a standard equipment.
Since the parts in contact with liquid are integrally molded in PPS resin not containing glass and with excellent corrosion resistance and there are no sealed parts or pocket parts other than the pipe-connecting parts, PPS resin series are ideal for measuring chemical fluids, pure water incompatible with fluid contamination and similar fluids. ●Connection Size: 1/2, 3/4B ●Applicable Fluid: Water, Pure Water, Chemical Fluids Compatible with PPS resin etc. ●Accuracy: ±3％FS ●Flow Rate Range: 3.0 ~ 120 L/min (in case of water) ●Fluid Temperature: 0 ~ 50℃ ●Fluid Pressure: 1.0MPa ●Connection Method: Union Fitting (TS type)
Since the parts in contact with liquid are integrally molded in PEEK resin with excellent corrosion resistance and have a completely pocketless structure, PEEK resin series are ideal for measuring ultrapure water, chemical fluids and similar fluids. ●Connection Size： 1/2, 1B ●Applicable Fluid： Chemical Fluids, Corrosive Fluids, Ultrapure Water etc. ●Accuracy: ± 3% RD (± 1% RD is also possible) ●Flow Rate Range： 1.7 ~ 220L/min ●Fluid Temperature： 0 ~ 140℃ ●Fluid Pressure： 0.39 ~ 0.98MPa ●Connection Method： Screw Fitting, Wafer-style
The vortex signal is detected with high accuracy by ultrasonic wave, totalized flow rate and momentry flow rate are displayed on site and both analog output and pulse output are available. ●Connection Size: 1, 11/2, 2, 3, 4B ●Applicable Fluid：Liquids (Excepting Liquids Incompatible with SUS316) ●Accuracy: ±1.0％RD（±0.5％RD） ●Flow Rate Range：0.6 ~ 20m3/h ●Fluid Temperature： −20 ~ 160℃(Waterproof Models) −20 ~ 120℃(Explosion-proof Models) ●Fluid Pressure：5.0MPa ●Piping Connection： Wafer Type, Flange Type