Automotive Parts Products and services

Asia wide Manufacturing Business Platform in Malaysia

TECH DIRECTORY Malaysia

Automotive Parts

Industry

All From 131 1 - 80 items are displayed

  • Mitsubishi Materials' Intake Air Temperature Sensor (IAT Sensor) Mitsubishi Materials' Intake Air Temperature Sensor (IAT Sensor)
    • Catalogue

    Features •Integrated waterproof connector sensor •Quick response (6 sec) •Easy and reliable attaching with screws •Precise temperature measuring •Tough against extreme heat cycling and vibration •Double molding makes for airtight construction

    Target industry: Automotive Parts Industrial Machinery/Devices

    Mitsubishi Materials Corporation Electronic Components Division

  • Mitsubishi Materials' Antenna Products Mitsubishi Materials' Antenna Products
    • Catalogue

    Surface mountable dielectric chip antennas are result of harmonizing our long experience in ceramic material & process technologies for high frequency applications together with cutting-edge RF design technologies. It is very small with low profile, but has a wide range of frequency band. It is suitable for compact mobile equipment and communication modules. Chip antenna •Very small •High gain •Omni-directional •Can adjust to different frequencies by using an external tuning circuit Antenna Unit •very small •The antenna unit has a chip antenna with a matching circuit and a coaxial cable. •It is a design-free board and can reduce a development cost and initial cost.

    Target industry: Information/Communication Devices Automotive Parts Industrial Electrical/Control Equipment

    Mitsubishi Materials Corporation Electronic Components Division

  • Mitsubishi Materials' Thermistor Sensors Mitsubishi Materials' Thermistor Sensors
    • Catalogue

    What is a thermistor? A thermistor is a device type of resistor whose resistance is dependent on temperature, more so than in standard resistors. Assuming, that the relationship between resistance and temperature is linear, then:    ⊿R = α ⊿T Thermistors can be categorized into two types, depending on the classification of α. If α is positive, the resistance increases with increasing temperature, and the device is called a Positive Temperature Coefficient(PTC) thermistor. If α is negative, the resistance decreases with increasing temperature, and the device is called aNegative Temperature Coefficient(NTC) thermistor. PTC thermistors are used self-resetting overcurrent protectors like a fuse, or are used self-regulating heating elements. NTC thermistors are used widely as a temperature sensors, or are used inrush current limiter. NTC thermistor application is widely used for temperature detection of electronic devices and appliances for NTC thermistor function, performance and price reasons. Mitsubishi Materials' NTC thermistors are manufactured from high purity and uniform materials to achieve a construction of near-perfect theoretical density. This ensures small size, tight resistance and B-value tolerances, and fast response to temperature variations, making a highly sensitive and precision component. Thermistor is available in a wide range of types to meet your demands for small size and high reliability.

    Target industry: Automotive Parts Consumer Electrical Appliances Industrial Machinery/Devices

    Mitsubishi Materials Corporation Electronic Components Division

  • Mitsubishi Materials' Surge Absorbers / Surge Protective Device Components Mitsubishi Materials' Surge Absorbers / Surge Protective Device Components
    • Catalogue

    What is Surge? Solving Surge Problems! Surge is abnormal transient voltage and is categorized according to where it is originated. At Mitsubishi Materials, we provide countermeasure devices/solutions for circuitry and ESD surge caused by electrostatic discharge as well as induced surge caused by lightning discharge. What is a Surge Absorber? A device protecting electronic equipment from surge (abnormal voltage) is called a Surge Protective Device (SPD). SPDs protect from entry of surge between ① the line to line interval or ② the interval from the line to the ground. SPD typically has a high resistance level and most of the electric currents do not flow (nor influence the electronic equipment). However; when surge (abnormal voltage) enters, the Surge Absorber instantly eliminates surge with low resistance to protect the electronic equipment. When surge is eliminated, the Surge Absorber returns to high impedance. Surge absorbers are also called surge arresters, lightning arresters, gas discharge tubes(GDT).

    Target industry: Consumer Electrical Appliances Automotive Parts Information/Communication Devices

    Mitsubishi Materials Corporation Electronic Components Division

  • Custom Made Cold Forged and CNC Turned Components made in Malaysia Custom Made Cold Forged and CNC Turned Components made in Malaysia
    • Catalogue
    • Partnership required

    Million Interwork engaged in manufacturing and supply precision forged and turned metal components to numerous markets in Taiwan and Malaysia. Produce Capabilities : Automotive components & motors parts including steering mechanism parts, drive shaft parts, transmission parts, brake system parts, knuckles, shock absorber parts, connecting rods, bottom brackets, suspension system parts. Motorcycle parts, including handle bases, triangular upper mounts, starter bars, drive gears, transmission parts. General industrial applications forging, cold forging, cold forming and turning parts Multi-forming process products, and heading parts with precision machining Cold forged and turned Loudspeaker metal parts: Pole Piece Specialty and standard industrial fastener manufacturing Cold Forged - autmotive components & motors parts Various thread forming and tapping machining Cutting Example of Cold Forged Parts Precision NC Auto Lathe Work Shafts & special-headed parts Headed rivet, axle and pins Cold Forging Bevel Gears Screw machined products Engineering components Special bolt and loctite Custom fasteners Tubular parts Please visit our website to have a further understanding about the full range of our products. MILLION INTERWORK SDN. BHD. Lot 315, Jalan PKNK 3, Kawasan Perindustrian Sungai Petani, 08000 Sungai Petani, Kedah, Malaysia Tel: 60-4-441 5188 Fax: 60-4-442 9092 Web: http://www.masgroup.com.my E-mail: million@masgroup.com.my Loud-speaker,pole piece,t-yoke,u-yoke,cone,grille,voice coil,spider,dust cap,basket,surround,diaphragm,tags,magnet,frame, woofer,washer,pole plate,speaker metal parts,Polkern, placa polar, altoparlanti,altovoz,luidspreker,alto falantes,haut-parlear,spyker,hoparlor, parlantes,Lautsprecher,bottom,casters rivet,Pins,Washer,Screws,Nuts,Bolts,Castors, Rivet,Motorcycle components,Placa Polar,Placa Posterior,拡声器, forging,forged,CNC,gear,forge,tube,Pipe Nipple,spacer,rivet,washer,Screws,Bolt,axle,pin,forming,tapping,speaker,yoke,flange,Shafts,bits,t-yoke,pot,bush,Fastener,boss,rod,Camshaft Bushing, Plunger Barrel Sprocket axle,bushes,nut,Furniture fittings, Suspension Bushings,screw fittings,Bushings and Sleeves Horn Driver Adapter

    Target industry: Automotive Parts Machine Parts Metallic Products/Parts

    MILLION INTERWORK SDN. BHD.

  • Vertical Turning Lathe V920EX Vertical Turning Lathe V920EX
    • Catalogue

    With a smaller footprint, the V920EX has a larger work envelop, higher performance, and handles more workpiece applications. The innovative productivity of large-diameter thin and add-shaped workpieces makes it ideal for global market applications requiring construction, aerospace and industrial machinery.

    Target industry: Automotive Parts Machine Parts Automotive/Transport Machinery

    Okuma Techno (Thailand) Ltd Singapore Branch

  • 1-Saddle CNC Lathe GENOS L3000 1-Saddle CNC Lathe GENOS L3000
    • Catalogue

    The GENOS L3000 has turning, milling and Y-axis specifications with models that have distance between centers available for each. Users can select the best specifications for their workpiece length and shape.

    Target industry: Automotive Parts Machine Parts Automotive/Transport Machinery

    Okuma Techno (Thailand) Ltd Singapore Branch

  • CNC CYLINDRICAL GRINDERS GPW/GAW series CNC CYLINDRICAL GRINDERS GPW/GAW series
    • Catalogue

    Target industry: Automotive Parts Machine Parts Automotive/Transport Machinery

    Okuma Techno (Thailand) Ltd Singapore Branch

  • Cold forged and turned parts Cold forged and turned parts
    • Catalogue
    • Distributor required
    • Partnership required

    Cold Forged precision metal parts

    Target industry: Automotive Parts Machine Parts Other Manufacturing

    MILLION INTERWORK SDN. BHD.

  • Cold forged fasteners Cold forged fasteners
    • Catalogue
    • Distributor required
    • Partnership required

    Million Interwork Sdn. Bhd. specializing in manufacturing & designing forging, forming metal parts in Malaysia.

    Target industry: Automotive Parts Machine Parts Electrical/Electronic Parts

    MILLION INTERWORK SDN. BHD.

  • Cold forged auto parts Cold forged auto parts
    • Catalogue
    • Distributor required
    • Partnership required

    MILLION INTERWORK SDN. BHD. is engaged in the manufacturing custom made parts. we are specialized in cold forged and CNC machined parts such as Automobile industry, loudspeaker metal parts, motorcycle component and many additional related industries etc.

    Target industry: Automotive Parts Machine Parts Precision Equipment

    MILLION INTERWORK SDN. BHD.

  • Automotive Components Automotive Components

    Our machined metal parts to serve as automobile components contribute to the safety of the automobile society and to the environment, relying heavily on the precision cutting in which we became veterans through precision machining of watch components. We meet customer needs by providing added value through the entire sequence of integrated production, from machining ? mainly precision cutting and precision press work but also including EDM hole machining, grinding, polishing, heat treatment and surface treatment ? up to assembly and function testing. We aim to be the best supplier complementing the above-mentioned processing techniques with streamlined in-house facilities and engineering proposals.

    Target industry: Automotive Parts

    CITIZEN FINEDEVICE CO.,LTD.

  • Combustion Pressure Sensor Combustion Pressure Sensor

    The current internal combustion engines used in automobiles have a combustion efficiency of only around 30% at best, and they cannot convert all of the energy from the fuel into power. Amid calls for energy savings, all of the automobile manufacturers are engaged in continuous research to increase combustion efficiency, but the fuel economy performance required of engines for automobiles is high, and it is not easy to satisfy this requirement. As one means of responding to market demand, it is becoming increasingly important to ascertain what is actually happening inside the cylinders and to implement control in accordance with that status. What makes this possible is combustion pressure sensors. To measure directly the combustion pressure inside the cylinders, which had been difficult to measure up until now, and make a major contribution to the realization of optimum combustion state.

    Target industry: Automotive Parts Machine Parts Electrical/Electronic Parts

    CITIZEN FINEDEVICE CO.,LTD.

  • MMC (Metal Matrix Composites) MMC (Metal Matrix Composites)
    • Catalogue

    JFC produces MMC, Metal Matrix Composites, which have excellent properties that could not be realized with conventional metal materials or ceramic materials. These materials have the rigidity of metal with the lightness of aluminum while having low thermal expansion and high thermal conductivity as well as exhibiting excellent heat dissipation. With such materials, we are able to provide large components and realize complicated shapes. MMC with excellent physical properties will help those wanting to further improve the performance of apparatuses as well as those seeking a solution to challenging requirements of shape and specifications. Please feel free to contact us through the E-mail shown below whenever you have any questions. E-mail:seihin@japan-fc.co.jp

    Target industry: Semiconductors/LCD/FPD Machine Parts Automotive Parts

    JAPAN FINE CERAMICS CO., LTD.

  • Cold forged and turned parts made in Malaysia Cold forged and turned parts made in Malaysia
    • Catalogue
    • Distributor required
    • Partnership required

    Manufacture of precision cold forged and turned parts in carbon or low alloy steel

    Target industry: Automotive Parts Machine Parts Electrical/Electronic Parts

    MILLION INTERWORK SDN. BHD.

  • Optical Thin Film Formation Equipment    Genesis-AR series Optical Thin Film Formation Equipment Genesis-AR series

    This new equipment is able to form thin films on ball lenses and high curvature lenses with excellent uniform coverage as well as high quality, by using ALD (Atomic Layer Deposition) methods instead of general methods such as vaper deposition and sputtering. Main Specifications 1. Maximum 50 pieces of φ10 inch substrates can be processed by batch. (25 pieces × 2 axis) *The number of the processing varies according to the shape and conditions of substrates. 2.The substrates rotary mechanism is attached.

    Target industry: Optical Equipment/Parts Automotive Parts Resin/Plastic/Rubber Products

    SHOWA SHINKU CO., LTD.

  • Oil-sealed Rotary Vacuum Pumps Oil-sealed Rotary Vacuum Pumps
    • Catalogue

    Even among other mechanical vacuum pumps able to perform compression up to atmospheric pressure, oil-sealed rotary vacuum pumps are used widely around the world as they are economical, efficient, and operable using simple equipment. Users can achieve a vacuum state using oil-sealed rotary vacuum pumps. These pumps are also combined with roots vacuum pumps to make widely-used vacuum pump units (vacuum systems) having high exhaust speeds, and are also used as roughing pumps functioning as a part of vacuum facilities. Oil-sealed rotary vacuum pumps are for a wide range of applications. They play active roles in fulfilling vacuum-related needs in areas having to do with automobiles, metals, steel,packaging, foods, medical supplies, medical treatment, electricity, electronics,semiconductors, and advanced research. 90M3/H~1800M3/H TYPE P90/P180/P222/P450/P600/P901/K30002

    Target industry: Automotive Parts Food/Beverage Metallic Products/Parts

    Osaka Vacuum, Ltd.

  • ROOTS VACUUM PUMPS ROOTS VACUUM PUMPS
    • Catalogue

    A roots vacuum pump is a vacuum pump that compresses and exhausts by ounter-rotating two-lobed rotors. This mechanical vacuum pump is also referred to as a mechanical booster when it is mounted to the front end of an oil-sealed rotary vacuum pump to increase the volume flow rate. A roots vacuum pump is normally used with a vacuum pump that can compress up to atmospheric pressure 90M3/H~12000M3/H TYPE RA100/RD302/RD600/RD1200/RD1500/RD2500/R6002/ R12001

    Target industry: Automotive Parts Food/Beverage Metallic Products/Parts

    Osaka Vacuum, Ltd.

  • Turbo Molecular Pumps TGF-SERIES Turbo Molecular Pumps TGF-SERIES
    • Catalogue

    Ball bearing type,yet it can be mounted in any position. Its compact size and light weight add greater freedom to equipment layouts. Features a rugged structure with high resistance against rapid acceleration-can be operated as the entire apparatus moves. Also resistes sudden air in-rush and other impact-a feature not previously available in conventional TMP`s.There flexible mounting-position models are available in a large variety of size. Compound Molecular Pumps 50L/S~2400L/S TYPE TG50F/TG60F/TG70F/TG220F/TG240F/TG350F/ TG450F/TG800F/TG1100F/TG1400F/TG2400F/ TG2410F

    Target industry: Metallic Products/Parts Automotive Parts Semiconductors/LCD/FPD

    Osaka Vacuum, Ltd.

  • Visual Inspection System “iVision” Visual Inspection System “iVision”
    • Catalogue
    • Distributor required
    • Partnership required

    “The Visual Inspection System iVision” automates visual inspection of products, allowing speedy, high-accuracy and reliable inspection. From scratch, dirt and defect detection to dimensional and color identification inspection, as well as barcode, QR code and character reading.

    Target industry: Automotive Parts Semiconductors/LCD/FPD Electrical/Electronic Parts

    AdD Co., Ltd.

  • Specialty Cleaner for Automotive Parts - MClean 4021 Specialty Cleaner for Automotive Parts - MClean 4021
    • Catalogue

    Specialty cleaner to remove oil and grease materials on automotive parts without causing any corrosion to the surface.

    Target industry: Automotive/Transport Machinery Automotive Parts Metallic Products/Parts

    Mipox Malaysia Sdn Bhd

  • Ion Plating Equipment using Hollow Cathode System Ion Plating Equipment using Hollow Cathode System

    Showa Shinku's Ion Plating Equipment using Hollow Cathode System"SIHー400T" is most suitable to form decorative films for accessories and cured coating films for tools.

    Target industry: Automotive Parts Machine Parts Metallic Products/Parts

    SHOWA SHINKU CO., LTD.

  • Sputtering and Polymerization System Sputtering and Polymerization System

    The new developed sputtering and polymerization system integrated with injection molding system SPP-SERIES enables fully automatic formation of metallic and protective films on resin substrates used in the automobile and decoration industries.

    Target industry: Automotive Parts Metallic Products/Parts Resin/Plastic/Rubber Products

    SHOWA SHINKU CO., LTD.

  • Ion Plating Equipment Ion Plating Equipment

    Showa Shinku's Ion Plating Equipment "SIP-1600" is that the customers considering dried ornaments/painting can form a metal film on the resin substrate

    Target industry: Automotive Parts Metallic Products/Parts Resin/Plastic/Rubber Products

    SHOWA SHINKU CO., LTD.

  • Force-Displacement Measurement Unit FSA series Force-Displacement Measurement Unit FSA series
    • Catalogue

    The specialized measurement unit for testing or analyzing of Force-Displacement relationships. Force and displacement data is drawn in a graph at real time. Ideal for material characteristic tests and tactile tests.

    Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment

    IMADA CO.,LTD.

  • Tension Testing Machine Tension Testing Machine

    IMADA tension testing machine performs various tension test easily. The capacity is from 2N(200gf)~5000N(500kgf). Various tension tests are possible by the various shape/type fixtures. The possible tests are a film tension test, a wire breaking strength test, a connector exertion/ insertion test, a wine cork pull-out test and so on. It is an ideal tension tester for using at a production site or a research site by the easy operations and the desk-top size. There are many types and force ranges of testers such as simple and economical type according to your needs.

    Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment

    IMADA CO.,LTD.

  • Compression Testing Machine Compression Testing Machine

    IMADA compression testing machine performs various compression test easily. The capacity is from 2N(200gf)~5000N(500kgf). Various compression tests, sticking test, durable test, bending test, are possible by the various shape/type fixtures such as a pin gauge and a round shape fixture. It is an ideal compression tester for using at a production site or a research site by the easy operations and the desk-top size. There are many types and force ranges of testers such as simple and economical type according to your needs.

    Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment

    IMADA CO.,LTD.

  • Peel tester Peel tester
    • Catalogue

    IMADA peel tester performs various peeling test easily. The capacity is from 2N(200gf) to 200N(20kgf). There are 45 degree peel tester specialized a film cup container closure, ideal 90 degree/ 180 degree peel tester for adhesive tapes/ films. It is an ideal tester for using at a production site or a research site by the easy operations and the desk-top size.

    Target industry: Automotive/Transport Machinery Automotive Parts Electrical/Electronic Parts

    IMADA CO.,LTD.

  • Digital Force Gauge ZTS/ZTA series Digital Force Gauge ZTS/ZTA series
    • Catalogue

    A force measuring instrument for compression/ tension/ peel. [Basic Information] - 2 models are available. ZTS series: Standard type. ZTA: Advanced model adding to other functions to ZTS. - Available for Compression/Tension. - Capacity: 2N(200gf)~5000N(500kgf) - High Accuracy +/- 0.2%Full Scale - Unit switching: N/kN/ kgf/ gf/ lbf/ ozf(*Depends on capacity.) - Peak hold function - Pass/Fail decision - USB connection to PC. Data acquisition software is included. - 8 types of fixtures for elementary compression/tension tests

    Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment

    IMADA CO.,LTD.

  • Economical Model Mechanical Force Gauge (Push pull gauge) FB/FS series Economical Model Mechanical Force Gauge (Push pull gauge) FB/FS series
    • Catalogue

    [Basic Information] - It is available for compression and tension. - Capacity: 10N(1kgf)~500N(50kgf) - High accuracy +/-0.3%Full Scale - 3 types of model: N model/ kgf model/ lbf model - Peak hold function - 6 types of fixtures for elementary compression/tension tests

    Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment

    IMADA CO.,LTD.

  • Economical Digital Force Gauge DS2 series Economical Digital Force Gauge DS2 series
    • Catalogue

    Force measuring instrument compression/tension/peel [Basic Information] - It is available for compression and tension. - Capacity: 2N(200gf)~500N(50kgf) - High accuracy +/-0.2%Full Scale - Unit switching: N/ kgf/ gf/ lbf/ ozf (*Depends on capacity.) - Peak hold function - Pass/Fail decision - It is possible to connect with a PC by RS232C connection. - 6 types of fixtures for elementary compression/tension tests

    Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment

    IMADA CO.,LTD.

  • High-performance Air Samling Pump "Mini Pump, MP-ΣNII Series" High-performance Air Samling Pump "Mini Pump, MP-ΣNII Series"
    • Catalogue

    The Mini Pump MP-ΣNII Series is a compact, lightweight portable high-performance air suction pump with built-in integrated flow rate function. Based on flow rate capacity there are MP-Σ30NII, 300NII and Σ500NII models, and the MP-Σ100HNII high-load model. With its stable suction flow rate, this series is widely used for hazardous substance sampling at workplaces and for indoor and atmospheric environments. In addition, long operation hours are guaranteed with lithium-ion rechargeable batteries. [Features] • Instantaneous and integrated flow rates are digitally displayed • Constant flow rate function → Suppresses flow rate reduction due to incremental suction pressure • Sampling with 4 timer modes → Manual, down, volume and cycle timers • Large LCD with bright backlight • Built-in measurement data record function → Stores and displays the previous 10 readings on the body and is also able to transfer data to PCs * For more details, please contact us or download our catalogs.

    Target industry: Automotive Parts Scientific/Physics and Chemistry Instruments Aerospace Related

    SIBATA SCIENTIFIC TECHNOLOGY LTD.

  • Brother Compact Machining Center SPEEDIO R650X1 Brother Compact Machining Center SPEEDIO R650X1
    • Catalogue

    Brother Compact Machining Center SPEEDIO R650X1 【Expanding World of the SPEEDIO】 The R650X1 is equipped with the“ QT table”, Brother’s original high-speed 2-face pallet changer that has now been installed on over 15,000 units. The machine demonstrates high productivity, and also provides the largest machining area among "QT table" machines, enabling the mounting of large jigs that was not possible on conventional machines. The release of this new model will further expand the world of the SPEEDIO.

    Target industry: Automotive/Transport Machinery Automotive Parts Machine Parts

    Brother Commercial Thailand, LTD. Machine Tools Technical Center

  • Polishing Products for Automobiles Polishing Products for Automobiles
    • Catalogue

    Our technologies of ultra-precision polishing and products have developed along with densifying in the recording density of magnetic disks such as hard disks. In the future, we’ll expand our proprietary technologies of ultra-precision polishing into general polishing applications and provide consistent-quality high-efficiency processing to a broader range of industries including the automotive field and others.

    Target industry: Automotive/Transport Machinery Automotive Parts Machine Parts

    Mipox Malaysia Sdn Bhd

  • Graphite/Carbon Products for Automobiles Graphite/Carbon Products for Automobiles
    • Catalogue

    High-performance carbon products are used in a wide range of fields from our immediate environment to areas of cutting-edge technology. Our products are utilized for automobile bodies as well as the manufacture of various parts. *Please contact us for more details.

    Target industry: Automotive Parts Machine Parts Semiconductors/LCD/FPD

    TOYO TANSO (SINGAPORE) CO., LTD.

  • Graphite Electrode for Electrical Discharge Machining (EDM) Graphite Electrode for Electrical Discharge Machining (EDM)
    • Catalogue

    Graphite electrodes for electrical discharge machining (EDM) are widely utilized for fabricating numerous molds for plastics, die-casting, forging, pressing and more. Graphite has the versatility for machining from very large to very small precision sizes. Due to its ultrafine particle structure on the order of microns, the TTK grades Toyo Tanso developed have superior characteristics for electrode cutting, wire EDM and die milling discharge. This prevents the development of sharp edges, reduces the amount of electrode consumption and enhances discharge surface roughness, which had previously been difficult with graphite materials. *Please contact us or download our catalogue for more details.

    Target industry: Automotive Parts Machine Parts Semiconductors/LCD/FPD

    TOYO TANSO (SINGAPORE) CO., LTD.

  • Heat Treatment:  Heat treatment tray made of C/C composite Heat Treatment: Heat treatment tray made of C/C composite
    • Catalogue

    Heat treatment trays (baskets, grids and so on) made of C/C composites offer excellent value in terms of post-installation operating costs and longevity, allowing better overall cost performance than ordinary metal trays. Isotropic graphite products also have high heat resistance, making them ideal for heaters, structures inside furnaces, jigs for product processing, decks and other parts in heat treatment furnaces operating under high temperature. *Please contact us or download our catalogue for more details.

    Target industry: Automotive Parts Machine Parts Semiconductors/LCD/FPD

    TOYO TANSO (SINGAPORE) CO., LTD.

  • Graphite Product , “Continuous Casting” Graphite Product , “Continuous Casting”
    • Catalogue

    Due to its ability to resist wetting by molten metal, graphite is used as a mold material for strip dies, tubular dies and other molds used in continuous casting processes for copper and copper alloys (brass, bronze, nickel silver and the like), aluminum alloys, cast iron, precious metals, and a variety of other metals. Accordingly, graphite can be used with different continuous casting methods (horizontal/vertical) and can be produced in a variety of ingot shapes (including plates, strips, pipes, rods, wire, and irregular shapes). With a wide range of grades available, Toyo Tanso can select the optimal grade for a variety of cast metals and alloys.  We also maintain control of quality, cost, and delivery dates through an integrated production system from raw materials to finished items that allows us to deliver consistent-quality Casting products. Carbon products are also used in peripheral components such as melting crucibles, stoppers, tundishes, sliding plates and others as well as in a variety of other processes, including carbon brushes for rolling and winding machines and so on. *Please contact us for more details for the selection of your optimal grade.

    Target industry: Automotive Parts Machine Parts Semiconductors/LCD/FPD

    TOYO TANSO (SINGAPORE) CO., LTD.

  • Graphite Sheet Product, “Packing Gasket” Graphite Sheet Product, “Packing Gasket”
    • Catalogue

    Toyo Tanso's graphite sheet, PERMA-FOIL®, is widely used as packing gasket that can replace automobile head gaskets and asbestos used in various industries by virtue of its flexibility, sealing properties and heat resistance. Its microscopic structure doesn’t allow gases or liquids to pass through easily, providing excellent sealing properties. In addition, it is made from graphite, so PERMA-FOIL® can be used between -200°C and 3200°C in a non-oxidizing atmosphere, making for strong resistance to acids and alkalis. We offer various grades of differing thicknesses and densities, allowing us to propose products to suit your application, working conditions, or surroundings. *Please contact us for more details.

    Target industry: Automotive Parts Machine Parts Semiconductors/LCD/FPD

    TOYO TANSO (SINGAPORE) CO., LTD.

  • Fluorine resin porous product Fluorine resin porous product
    • Catalogue
    • Distributor required
    • Partnership required

    It is a product made by using the porous PTFE. We have two types manufactured: sheet shaped and tube shaped.

    Target industry: Automotive Parts Electrical/Electronic Parts Chemical Materials/Products

    Chukoh Chemical Industries, Ltd.

  • Fluorine resin Tube Fluorine resin Tube
    • Catalogue
    • Distributor required
    • Partnership required

    We meet the customers needs with longtime experience and technological know how on wide range from the straight tube including PTFE/PFA, up to the various types of tube machining.

    Target industry: Automotive Parts Medical Instruments Chemical Materials/Products

    Chukoh Chemical Industries, Ltd.

  • Fluorine resin Belts Fluorine resin Belts
    • Catalogue
    • Distributor required
    • Partnership required

    These are conveyor belts manufactured by coating the fluoroplastic to various industrial cloths and shaping them into belts for light conveyance. We have a wide range of track oriented belts designed to improve conveyor stability. The belts can be chosen from a wide variety of colors and raw material combinations by using the coat guide or pin guide or as per requirements. These belts are used in various manufacturing processes including manufacturing foods, fibers, building materials, plastics, ceramics.

    Target industry: Automotive Parts Resin/Plastic/Rubber Products Food/Beverage

    Chukoh Chemical Industries, Ltd.

  • Brother compact machining canter SPEEDIO S1000X1 Brother compact machining canter SPEEDIO S1000X1
    • Catalogue

    Brother compact machining canter SPEEDIO S1000X1 Expanding coverage of #30 machine "Machining larger workpieces using #30 machine" The release of the S1000X1 machining center sees an override in the conventional machining areas of #30 machines. Continuing in the spirit of overwhelming high productivity,the machine will launch a challenge to new machining areas,boosting our "Brother also in this process" concept.

    Target industry: Automotive/Transport Machinery Automotive Parts Machine Parts

    Brother Commercial Thailand, LTD. Machine Tools Technical Center

  • Magnesium carbonate Magnesium carbonate
    • Catalogue

    High-purity basic magnesium carbonate fine powder isolated from seawater using our original method. - GOLD STAR GOLD STAR is characterized by high translucency when blended with natural rubber. - HEAVY TYPE Heavy Type has a low bulk density and fewer impurities than ordinary products. Powder type is also available. [Applications] Natural rubber/synthetic rubber/plastics/inks food additives/anti-caking agents/animal feed additives/fertilizers cosmetics/general chemical industry materials/ glass/ceramics/paper

    Target industry: Automotive Parts Chemical Materials/Products Medical Supplies/Biotechnology

    Konoshima Chemical Co.,Ltd.

  • Magnesium oxide Magnesium oxide
    • Catalogue

    STARMAG is our line of high-purity light-burned magnesium products isolated from seawater. We have a wide variety of composites to meet our customers’ diverse needs. - STARMAG #150 is high-active, STARMAG #50 is medium-active, and STARMAG #20 is low-active, all providing excellent dispersibility in rubber and plastics. - STARMAG CX is a surface treatment type with superb hygroscopicity and dispersibility in polymers. - STARMAG P and KS are pharmaceutical-grade products. STARMAG KS is a granular type with good flowability, contributing to improvement in productivity.

    Target industry: Automotive Parts Chemical Materials/Products Resin/Plastic/Rubber Products

    Konoshima Chemical Co.,Ltd.

  • Water-soluble lubricant corrosion inhibitor for steel wire Sunlube P-557 Water-soluble lubricant corrosion inhibitor for steel wire Sunlube P-557
    • Catalogue
    • Distributor required
    • Partnership required

    Sunlube P-557 is a corrosion inhibitor with lubricity. Applying it to steel wire will give lubricity to the surface. Prevents scratches caused by wires touching each other. [Features] - Applying it to steel wire will give and/or improve lubricity to its surface. - To reduce wire volume - Can be used as a corrosion inhibitor because it contains an anti-corrosion element * For details, please download our catalogues or contact us.

    Target industry: Automotive Parts Automotive/Transport Machinery Aerospace Related

    ASAHI Co., Ltd.

  • Water-soluble corrosion inhibitor AS-30 Water-soluble corrosion inhibitor AS-30
    • Catalogue
    • Distributor required
    • Partnership required

    Water-soluble corrosion inhibitor AS-30 has been newly developed to prevent corrosion on metals and aluminum and for pre-treatment of surface coating or plating. Its water-solubility provides flammability protection, better workability, economical efficiency, pollution countermeasures, and more. [Specifications] - Active ingredients: Alkanolamine salts of fatty acids - Appearance: Clear colorless liquid - PH: 8.3 (1% solution) * For details, please download our catalogues or contact us.

    Target industry: Automotive/Transport Machinery Automotive Parts Aerospace Related

    ASAHI Co., Ltd.

  • Water-repellent corrosion inhibitor KC-80 Water-repellent corrosion inhibitor KC-80
    • Catalogue
    • Distributor required
    • Partnership required

    The best property of KC-80 is that immediately after the metal surface is treated and its water content has dried, it can be painted/coated. Coating film adhesion won’t be affected. KC-80-treated metal surfaces have water resistance, which gives anti-rust and anti-tarnish effects for a certain period of time. [Features] - Water repellent agent with a special surfactant as a main ingredient - Forms a thin monomolecular layer on the metal surface to repel water - Highly concentrated type is also available * For details, please download our catalogues or contact us.

    Target industry: Automotive/Transport Machinery Automotive Parts Aerospace Related

    ASAHI Co., Ltd.

  • Silver surface treatment agent AGR-100 Silver surface treatment agent AGR-100
    • Catalogue
    • Distributor required
    • Partnership required

    Silver surface treatment agent AGR-100 removes tarnish naturally generated over time, allowing surfaces with metallic luster to reappear. [Features] - Great anti-tarnish agent, conforms to MIL-QQ-S-365D specifications for bright silver and semi-bright silver - Powerful protective film made of ammonium sulfide solution - AC-100 forms a protective film through chemical reaction with silver, with strong adhesion that never washes off with water * For details, please download our catalogues or contact us.

    Target industry: Automotive Parts Automotive/Transport Machinery Aerospace Related

    ASAHI Co., Ltd.

  • Water-soluble gold anti-tarnish agent AU-20 Water-soluble gold anti-tarnish agent AU-20
    • Catalogue

    Water-soluble gold anti-tarnish agent AU-20 was developed to protect various gold-plated electronic parts from corrosive gas. As electronic parts have become smaller and high-density integration has advanced, it has become more important to enhance performance reliability. Especially at contact points, where reliability is vital, gold plating is applied. Although gold is chemically stable with low electrical resistance and it has excellent corrosion resistance even in corrosive environments, gold plating layer is usually thin due to its high cost. This can result in pinholes forming easily, which can lower performance due to corrosion caused by corrosive gas entering through the pinholes. [Features] - Great corrosion resistance with only a small increase in contact resistance. → Successfully passes various environmental tests, such as heat resistance, anti-salt spray, anti-sulfuric acid gas, anti-hydrogen sulfide gas, with a minimum increment of contact resistance after testing. → AU-20 reacts with nickel surfaces as well as copper alloys to protect them from corrosive environments. - Solderability is not affected - Maintains necessary lubricity * For details, please download our catalogues or contact us.

    Target industry: Automotive/Transport Machinery Automotive Parts Aerospace Related

    ASAHI Co., Ltd.

  • Silver anti-tarnish agent/AC series Silver anti-tarnish agent/AC series
    • Catalogue
    • Distributor required
    • Partnership required

    This silver anti-tarnish agent protects electric and electronic components processed with silver or silver plating as well as jewelry from ambient contaminants. We offer neutral water-soluble and solvent bases for anti-tarnish agents. Among our anti-tarnish agents, AC-20 and AC-70 have higher tarnish prevention effect for sulfide gas, and AC-410 for potassium sulfate solution. [Features] - Strong tarnish prevention effect - Can be used with a wide pH range (pH4 - 10) - Strong adhesion A protective film is formed through chemical reaction with silver, providing strong adhesion that cannot be washed off with water. - High solderability High solderability allows it to be used for various electric and electronic components. - Economical as it can be diluted by as much as 10 times. - Already a neutral agent so no neutralization treatment is required at disposal. - Packaging: Contains 18kg * For details, please download our catalogues or contact us.

    Target industry: Automotive/Transport Machinery Automotive Parts Aerospace Related

    ASAHI Co., Ltd.

  • Copper oxide film removal agent (Tarnish removal agent) CU-600 Copper oxide film removal agent (Tarnish removal agent) CU-600
    • Catalogue
    • Distributor required
    • Partnership required

    This agent removes tarnish and discoloration on copper, copper alloys and other metals. CU-600 is a neutral agent, safer than other agents. Won’t damage metal surfaces since it only removes metal oxide. [Features] - Removes oxide film on copper and restores original color. - Just by dipping materials in this agent, tarnish is easily removed. - CU-600 is a neutral oxide film removal agent for copper. - Won’t damage metal surfaces, since it only removes copper oxide. - Low-cost since it can be used undiluted or diluted. - Copper soft etching agent Z series is also available. Recommended for use with our tarnish removal agent. * For details, please download our catalogues or contact us.

    Target industry: Automotive/Transport Machinery Automotive Parts Aerospace Related

    ASAHI Co., Ltd.

  • Copper anti-tarnish agent/BT Series Copper anti-tarnish agent/BT Series
    • Catalogue
    • Distributor required
    • Partnership required

    This water-soluble anti-tarnish agent for copper prevents oxidation and chronic discoloration by forming complex protective compounds on copper surfaces. Coating treatment can be done simply by dipping. [Features] - Neutral water-soluble agent - Simply by dipping materials into the agent diluted 10-20 times, surfaces will have extended protection from oxidation and will maintain their sheen. - Surfaces treated with this agent will not suffer decreased electrical resistance. - Has good paint adhesion, reducing defect rate. - In the case of copper-finished articles that have already been discolored by machining oil or heated through machining, it is more effective if an oxide film removal agent is used along with copper CU-600. - Can be used to prevent discoloration after plating or barrel polishing. Also effective if used during the barrel polishing process. * For details, please download our catalogues or contact us.

    Target industry: Automotive/Transport Machinery Automotive Parts Aerospace Related

    ASAHI Co., Ltd.

  • Thermal Solution Thermal Solution
    • Catalogue
    • Distributor required

    ◆Passive Control: The heat sink and airflow control provide efficient heat dissipation. ◆Active Control: Active control using heater, Peltier device, chiller(liquid cooling) and airflow provide accurate control of DUT temperature which varies per device.

    Target industry: Semiconductors/LCD/FPD Automotive Parts Electrical/Electronic Parts

    SDK Co.,LTD

  • IC Test Socket IC Test Socket
    • Catalogue
    • Distributor required

    ◆Plastic components can be machined or molded depending on customer's specific application and volume. ◆Aluminum alloy is available for socket housing to enhance thermal performance and increase physical strength. ◆Capable of designing a socket handling large electric current of power devices such as IGBT, power transistor or electric current sensor.

    Target industry: Semiconductors/LCD/FPD Automotive Parts Information/Communication Devices

    SDK Co.,LTD

  • IC Burn-in Socket IC Burn-in Socket
    • Catalogue
    • Distributor required

    Product Highlights: ◆Both open-top and clamshell styles are available to support manual to automated device loading/unloading. ◆Compact design with simple architecture maximizes the board density. ◆Wide selection of contacts are available depending on test application and environment, including high force contact suitable for room temp. testing. ◆PKG knock-off feature is incorporated to prevent contact sticking to solder balls often occuring in burn-in environment. ◆A special plating method is available for bow shape contact to significantly improve programming test cycles.

    Target industry: Semiconductors/LCD/FPD Automotive Parts Electrical/Electronic Parts

    SDK Co.,LTD

  • Image Sensor Test Socket Image Sensor Test Socket
    • Catalogue
    • Distributor required

    ◆Flexible custom design capability of handling any type of device outline and shape ◆Removable lid, Open-top and Clamshell styles are all available to support manual to ATE testing ◆Active device guide feature can be incorporated to accurately align the optical center of the device with socket center ◆Hard surface treatment for plastic is available to prevent wear of socket body caused by the friction with ceramic package ◆Multi site testing can be supported

    Target industry: Semiconductors/LCD/FPD Automotive Parts Electrical/Electronic Parts

    SDK Co.,LTD

  • High Performance Thermal Control System High Performance Thermal Control System
    • Catalogue
    • Distributor required

    SDK Thermal Control System controls DUT temperature by transferring heat directly to DUT through thermal stage. SDK, with full responsibility, manage designing of the total system from thermal to mechanical (test stage/fixture),realizing the best optimized system. The system is compact, desktop style, just weighing 20kg. It's quiet, causing little vibration, not requiring compressed air.

    Target industry: Semiconductors/LCD/FPD Electrical/Electronic Parts Automotive Parts

    SDK Co.,LTD

  • High Performance Power Transistor Socket Series C001 High Performance Power Transistor Socket Series C001
    • Catalogue
    • Distributor required

    In the power IC industry, high voltage resistant and high current devices have been actively developed in recent years, including the ones using SiC material. But up to now, there's been no test socket suited for such application. SDK has developed a high perfromance socket working under high temperature, satisfying such demands.

    Target industry: Semiconductors/LCD/FPD Electrical/Electronic Parts Automotive Parts

    SDK Co.,LTD

  • Reinforced Rubber Sheet/Rubber Coated Fabric Reinforced Rubber Sheet/Rubber Coated Fabric
    • Catalogue

    This product is a reinforced rubber sheet sandwiched fibers(fabrics) with various types of rubber. It is also called "Jabara sheet". Various types of sheets with capabilities including mechanical strength, oil resistance, weather resistance, and heat resistance are available. We are able to provide wide and long sheets which is superior in accuracy of thickness by stretching rubber widely and then topping onto fibers(fabrics). Taking advantage of manufacturer, we are able to produce special orders responding to your specifications including changing thickness or width of the products, changing materials of rubber or fibers.

    Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment

    SHIBATA INDUSTRIAL CO.,LTD.

  • Rubber Safety Antistatic Boots Type 13 Rubber Safety Antistatic Boots Type 13
    • Catalogue

    Rubber Safety Antistatic Boots Type 13 releases static electricity from outsole to floor while you work under environment concerning static electricity (Environments using organic substances or handling explosive hazardous materials). Steel toe cap is applied and protects your toe from falling objects. Outsole has oil resistance property so that you may use it comfortably even on oily surface. It is soft and has high working property that are some of characteristics of rubber shoes.

    Target industry: Automotive Parts Chemical Materials/Products Construction

    SHIBATA INDUSTRIAL CO.,LTD.

  • Cartesian coordinate robot BA-III series Cartesian coordinate robot BA-III series
    • Catalogue

    Toshiba’s Cartesian coordinate robot COMPO ARM has been chosen and utilized in a variety of production lines for its high reliability and excellent usability. Inheriting the features of the conventional models of the BA-II, the BA-III series offers improved functionality for better usability.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    TOSHIBA MACHINE CO., LTD.

  • SCARA robot THP series (Arm lengths of 550mm - 700mm) SCARA robot THP series (Arm lengths of 550mm - 700mm)
    • Catalogue

    Never tires even after 24-hour high-cycle operations! The THP series is a high-speed, high-cycle SCARA robot that has achieved continuous extended operation at maximum speed. The THP series is available with arm lengths of 550mm and 700mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    TOSHIBA MACHINE CO., LTD.

  • SCARA robot TH series high payload type (Arm lengths of 650mm - 1200mm) SCARA robot TH series high payload type (Arm lengths of 650mm - 1200mm)
    • Catalogue

    The TH series offers SCARA robots with arm lengths of 180mm - 1200mm. Available from compact to large types, the TH series supports a wide range of applications. Options to assure compliance with cleanroom standards or water-and-dust proof requirements (IP65), ceiling mount, etc. are available. The TH series high payload type is available with arm lengths of 650mm - 1200mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    TOSHIBA MACHINE CO., LTD.

  • SCARA robot TH series high speed high accuracy type (Arm lengths of 450mm, 550mm) SCARA robot TH series high speed high accuracy type (Arm lengths of 450mm, 550mm)
    • Catalogue

    The TH series offers SCARA robots with arm lengths of 180mm - 1200mm. Available from compact to large types, the TH series supports a wide range of applications. Options to assure compliance with cleanroom standards or water-and-dust proof requirements (IP65), ceiling mount, etc. are available. The TH series high speed high accuracy type is available with arm lengths of 450mm and 550mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    TOSHIBA MACHINE CO., LTD.

  • SCARA robot TH series compact type (Arm lengths of 180mm - 350mm) SCARA robot TH series compact type (Arm lengths of 180mm - 350mm)
    • Catalogue

    The TH series offers SCARA robots with arm lengths of 180mm - 1200mm. Available from compact to large types, the TH series supports a wide range of applications. Options to assure compliance with cleanroom standards or water-and-dust proof requirements (IP65), ceiling mount, etc. are available. The TH series compact type is available with arm lengths of 180mm - 350mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    TOSHIBA MACHINE CO., LTD.

  • SCARA robot THL series large type (Arm lengths of 800mm - 1000mm) SCARA robot THL series large type (Arm lengths of 800mm - 1000mm)
    • Catalogue

    The SCARA robot THL series large type was developed bearing in mind the concepts of low cost, light weight and power savings. This globally strategic product targets Asian markets in particular and, to keep the price low, it focuses on features and performance designed to meet the needs of the global market. The THL series large type is available with arm lengths of 800mm - 1000mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    TOSHIBA MACHINE CO., LTD.

  • SCARA robot THL series (Arm lengths of 500mm - 700mm) SCARA robot THL series (Arm lengths of 500mm - 700mm)
    • Catalogue

    The SCARA robot THL series was developed bearing in mind the concepts of low cost, light weight and power savings. This globally strategic product targets Asian markets in particular and, to keep the price low, it focuses on features and performance designed to meet the needs of the global market. The THL series is available with arm lengths of 500mm - 700mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    TOSHIBA MACHINE CO., LTD.

  • SCARA robot THL series compact type (Arm lengths of 300mm and 400mm) SCARA robot THL series compact type (Arm lengths of 300mm and 400mm)
    • Catalogue

    The SCARA robot THL series compact type was developed bearing in mind the concepts of low cost, light weight and power savings. This globally strategic product targets Asian markets in particular and, to keep the price low, it focuses on features and performance designed to meet the needs of the global market. The THL series compact type is available with arm lengths of 300mm and 400mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    TOSHIBA MACHINE CO., LTD.

  • Vertically articulated robot TV series Vertically articulated robot TV series
    • Catalogue

    3 types of vertically articulated robots with arm lengths of 572 mm, 800mm and 1000mm, suitable for handling and assembly in cellar manufacturing systems. Standing in for human laborers, our TV series robots can be used in the manufacture of automobile or precision electronic components. Facilitates automation, labor savings and better productivity.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    TOSHIBA MACHINE CO., LTD.

  • Vertically articulated robot TVL500 Vertically articulated robot TVL500
    • Catalogue

    A vertically articulated robot with an arm length of 500mm. Demonstrates high-productivity in assembly or transport in limited spaces. Provides first-class performance and great usability, with a variety of available options.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    TOSHIBA MACHINE CO., LTD.

  • Ultrasonic cleaner W-118 Ultrasonic cleaner W-118
    • Catalogue

    Varieties of cleaning by optional cleaning program setting

    Target industry: Automotive Parts Industrial Machinery/Devices Metallic Products/Parts

    HONDA ELECTRONICS CO., LTD. Bangkok Representative Office

  • Ultrasonic plastic welder SONAC-200 Ultrasonic plastic welder SONAC-200
    • Catalogue

    Stable quality and high performance with lower power consumption

    Target industry: Automotive Parts Industrial Machinery/Devices Resin/Plastic/Rubber Products

    HONDA ELECTRONICS CO., LTD. Bangkok Representative Office

  • Die parts for automobile    Ball-lock・Cam unit・Wear plate  etc... Die parts for automobile Ball-lock・Cam unit・Wear plate etc...
    • Catalogue

    Designated supplier by the major automobile companies. High-quality and stable supply chain. Punch Industry Co., Ltd.'s automobile die parts are designated by major automobile companies in Japan and USA. We provide the standard parts and customer designed parts with the severe quality standard and stable delivery time.

    Target industry: Automotive/Transport Machinery Automotive Parts Metallic Products/Parts

    Punch Industry Co., Ltd.

  • Dust collector, CFA type Dust collector, CFA type
    • Catalogue

    These devices collect dust generated at factory or work place. The CFA series offers a portable model ideal for collecting dust in small areas, and models which achieve low noise in a smaller space.

    Target industry: Machine Parts Automotive Parts Metallic Products/Parts

    SHOWADENKI(THAILAND) Co.,Ltd.

  • Electric blower, Large-sized series (Denchoku) Electric blower, Large-sized series (Denchoku)
    • Catalogue

    Welding structure with directly-coupled motor shaft design, the Denchoku series has 142 models to meet our customers’ every need.

    Target industry: Machine Parts Automotive Parts Metallic Products/Parts

    SHOWADENKI(THAILAND) Co.,Ltd.

  • Highly efficient electric blower, Low Noise Series AH-H22 Highly efficient electric blower, Low Noise Series AH-H22
    • Catalogue

    Our original motor, compliant with Premium Efficiency Standard (IE3), is built in (Except for the 0.4kW model). Together with our “highly efficient impeller”, this is a series of superb electric blowers. The AH-H22 uses a turbofan with noise levels 5~7dB lower than our conventional models and efficiency improved by about 10%, thanks to its large airflow and reduced noise.

    Target industry: Machine Parts Automotive Parts Industrial Machinery/Devices

    SHOWADENKI(THAILAND) Co.,Ltd.

  • Electric blower, Multi-stage series, U type Electric blower, Multi-stage series, U type
    • Catalogue

    Our original motor, compliant with the Premium Efficiency Standard (IE3), is installed (Except for 0.4kW model). Together with our “highly efficient impeller”, this is a series of superb electric blowers. The U type is a high pressure and low airflow model with intensified airflow using multi-stage impellers. Outlet flange diameter of 75mm and 100mm are available.

    Target industry: Machine Parts Automotive Parts Metallic Products/Parts

    SHOWADENKI(THAILAND) Co.,Ltd.

  • Electric blower, high pressure series KSB type Electric blower, high pressure series KSB type
    • Catalogue

    Our original motor, compliant with the Premium Efficiency Standard (IE3), is installed (Except for 0.4kW model). Together with our “high-efficiency impeller”, this is a series of superb electric blowers. The KBS series offers high pressure, medium airflow models in a wide range from 0.4kW to 7.5kW.

    Target industry: Machine Parts Automotive Parts Metallic Products/Parts

    SHOWADENKI(THAILAND) Co.,Ltd.

  • Electric blower, flange installed series FS type Electric blower, flange installed series FS type
    • Catalogue

    Compact design with sirocco impellor. Direct attachment of the outlet flange to the device.

    Target industry: Automotive Parts Machine Parts Metallic Products/Parts

    SHOWADENKI(THAILAND) Co.,Ltd.

All From 131 1 - 80 items are displayed

Industry

PAGE TOP